CH701 AEC-Q100 Qualified, 3000V-RMS Isolation, Hall Current Sensor IC in SOIC-8 Package

PublishTime：2021-12-17

■Description:
●The CH701 current sensor IC is an economical and precise solution for AC or DC current sensing in industrial, automotive, commercial, and communications systems. The small package is ideal for space-constrained applications while also saving costs due to reduced board area. Typical applications include motor control, load detection and management, switched-mode power supplies, and overcurrent fault protection.
●The device consists of a precise, low-offset, linear Hall sensor circuit with a copper conduction path located near the surface of the die. Applied current flowing through this copper conduction path generates a magnetic field which is sensed by the integrated Hall IC and converted into a proportional voltage. A precise, proportional voltage is provided by the low-offset, chopper-stabilized BCD Hall IC, which is programmed for accuracy after packaging. The output of the device has a positive slope when an increasing current flows through the primary copper conduction path (from pins 1 and 2, to pins 3 and 4), which is the path used for current sensing. The internal resistance of this conductive path is 0.8 mΩ typical, providing low power loss.
●The terminals of the conductive path are electrically isolated from the sensor leads (pins 5 through 8). This allows the CH701 current sensor IC to be used in high-side current sense applications without the use of high-side differential amplifiers or other costly isolation techniques.
●The CH701 is provided in a small, low-profile surface-mount SOIC8 package. The leadframe is plated with 100% matte tin, which is compatible with standard lead (Pb) free printed circuit board assembly processes. Internally, the device is Pb-free, except for flip-chip high-temperature Pb-based solder balls, currently exempt from RoHS. The device is fully calibrated prior to shipment from the factory
■Features:
●Reinforced isolation: 3000V-RMS
●Total output error: ±1% typical
●AEC-Q100 qualified
●Primary conductor resistance: 0.8mΩ
●Single supply: 3.3V or 5V
●Output voltage proportional to AC or DC current: ±5A, ±10A, ±20A, ±30A, ±40A, ±50A
●Bandwidth: 120 kHz
●Response time: 4 us
●Ratio-metric output from supply voltage
●Adjustable bandwidth and resolution with a filter pin
●Small-footprint SOIC-8 package suitable for replacing bulky transformers or shunt current sensing solutions
●Integrated shield virtually eliminates capacitive coupling from current conductor to die, greatly suppressing output noise due to high dv/dt transients
●Factory-trimmed sensitivity and quiescent output voltage for improved accuracy
●Chopper stabilization results in extremely stable quiescent output voltage

Brand of Product：	Cosemitech
Part#：	CH701 、 CH703 、 CH701W 、 CH706 、 CH706W 、 CH707W 、 CH704 More Part#
Product Category：	Hall Current Sensor IC 、 current sensor IC More
Application：	[ Variable-frequency inverters ][ Motor control ][ Over-current fault protection ][ Load detection and management ] More
Data Type：	Datasheet More
Safety & Environment Standards：	More
Operating Temperature：	Please see the document for details
Qualification Grade：	More
Qualification Approval：	More
Package：	SOIC-8;SOIC8;CFF-5;SOIC-16
Language：	English Chinese Chinese and English Japanese
Date of Creation：	Nov 2021
Version Number：	Revision 1.5
Data Encoding：
Data Size：	3.9 MB

Data section preview(2pages)

- The full preview is over. If you want to read the whole 70 page document,please Sign in/Register -

Download

+1 Like
Add to Favorites

Recommend

New Products & Solutions

More>

Technical Resources

More>

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Integrated Circuits