EVAL-ADGM1304SDZ User Guide UG-1441 Evaluating the ADGM1304 0 Hz/DC to 14 GHz, Single-Pole, Four-Throw MEMS Switch with Integrated Driver
●This user guide describes the EVAL-ADGM1304SDZ evaluation board for the ADGM1304, a wideband, single-pole, four-throw (SP4T), microelectromechanical systems (MEMS) switch, and a control chip that are copackaged in a compact, 24-lead, 5 mm × 4 mm × 0.95 mm, lead frame chip scale package (LFCSP). The SP4T switch uses Analog Devices, Inc., MEMS switch technology and provides optimal bandwidth performance, power handling capability, and linearity for radio frequency (RF) applications. The control chip generates the high voltage signals required by the MEMS switch and allows the user to control operation through a flexible, complementary metal-oxide semiconductor (CMOS)-compliant or low voltage transistor to transistor logic (LVTTL)-compliant parallel interface, as well as via a serial peripheral interface (SPI). Multiple ADGM1304 devices can be daisy-chained together to enable the configuration of multiple devices with a minimal amount of digital lines.
■For the SPI interface, the evaluation board connects to the universal serial bus (USB) port of a PC via the system demonstration platform (SDP) board. The EVAL-SDP-CB1Z board (SDP-Bcontroller board) is available for order on the Analog Devices website at www.analog.com/SDP-B.
●The EVAL-ADGM1304SDZ comes fitted with connectors for RF and control signals, and links to allow the user to control the operation of the switch and evaluate the performance of the ADGM1304.
●Consult the ADGM1304 data sheet in conjunction with this user guide when using this evaluation board.
■FEATURES
●Single, 3.3 V dc supply voltage
●Wide frequency range
●SMA connectors for RF signals
●SMB connectors for switch control signals
●On-board calibration transmission line for analyzer calibration
EVAL-ADGM1304SDZ 、 ADGM1304 、 MCB0603R104KCT 、 06031A470JAT2A 、 SMB1251B1-3GT30G-50 、 M20-9990345 、 M7566-05 、 KRM 02 、 FX8-120S-SV(21) 、 MC0063W0603110K 、 MC0063W06031100K 、 32K243-40ML5 、 24LC32A-I/MS 、 PE6081 |
|
Four-Throw MEMS Switch 、 Integrated Driver 、 evaluation board |
|
|
|
User's Guide |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
1/ 2020 |
|
Rev. 0 |
|
UG-1441 |
|
925 KB |
- +1 Like
- Add to Favorites
Recommend
- EPC GaN FETs Deliver Benchmark Power Density and Efficiency for DC/DC Conversion
- Keysight Technologies and Analog Devices Demonstrate Latest O-RAN Technology at Mobile World Congress 2022
- Faster Evaluation Process with Unified and Scalable SMARC EVK Evaluation Board Kit Platform
- VC3: Evaluation System for New E/E Architecture Combining Digital and Analog Semiconductors
- Introduction to Evaluation Board Kit RZ/V Series Software Package for AI
- UMS CHA5350-99F 4 stage Medium Power Amplifier is Space Evaluated
- Renesas‘ RA2E2 fast prototyping board allows you to quickly and easily evaluate 32-bit MCU RA2E2 at a reasonable cost
- Standex-meder Streamlining Sensor Design With Reed Sensor and Magnet Design Evaluation Kits
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.