UBX-M8030 Versatile u-blox M8 GNSS chips
■The UBX-M8030 high performance standard precision GNSS chips from u-blox provide exceptional sensitivity and acquisition times for all GNSS systems. The chips utilize concurrent reception of up to three GNSS systems (GPS/Galileo together with either Beidou or GLONASS). Reception from more than one constellation simultaneously allows extraordinary positioning accuracy in urban canyons, even with weak signals and high dynamics.
■The UBX-M8030 chips feature low power consumption in concurrent reception mode and support advanced Power Save Modes for all GNSS, the power consumption remains low even for weak signals. The UBX-M8030 chips also support message integrity protection, geofencing and spoofing detection with configurable interface settings to easy fit to customer applications. The firmware supports QZSS, GAGAN and IMES together with WAAS, EGNOS, and MSAS.
■UBX-M8030 chips are available in miniature WL-CSP and QFN packages. Featuring built-in LNA, LDOs and a DC/DC converter, and a small external BOM, the UBX-M8030 enables ultra-small solutions with a footprint of only 30 mm². Supporting TCXOs or lower price oscillators further ensures a minimal Total-Cost-of-Ownership.
■The ultra small UBX-M8030-CT is a perfect choice for portable consumer applications with demanding size and cost constraints. Including rigorous automotive quality and manufacturing standards, extended testing and low failure rate make the UBX-M8030-KA chip ideal for automotive applications. With UBX-M8030-KA’s operational tempature from –40 °C to +105 °C, a new industry standard is set.
■Migration from existing FW2 based u-blox M8030 chip designs are simple, since the upgraded UBX-M8030 offers backward compatibility.
●Versatile GNSS chips in three product grades
■Concurrent reception of up to 3 GNSS (GPS, Galileo, GLONASS, BeiDou)
■Industry leading –167 dBm navigation sensitivity
■Industry lowest current consumption
■Superior position accuracy in urban canyons
■Security and integrity protection
■Support for all satellite augmentation systems
■Operating temperature range of –40°C to +105°C for the automotive grade chip
|
UBX-M8030 、 UBX-M8030-CT 、 UBX-M8030-KT 、 UBX-M8030-KA 、 EVK-M8N 、 EVK-M8C |
|
|
Versatile GNSS chips 、 high performance standard precision GNSS chips |
|
|
|
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
WL-CSP;QFN |
|
|
English Chinese Chinese and English Japanese |
|
|
2019 |
|
|
R07 |
|
|
UBX-15029937 |
|
|
262 KB |
- +1 Like
- Add to Favorites
Recommend
- Taoglas and u-blox Partner to Deliver Highly Reliable Positioning Solution for E-Bike Provider COWBOY
- New Movella Motion Sensor Xsens MTi-8 Backs up Centimeter-accurate Position Data with High-bandwidth Inertial Measurements
- MASWELL newly launched GNSS Planar Antenna AN.GNSS.L1.PCB with a low axial ratio covering the 1.56-1.602GHz Global Positioning frequency bands L1
- Maswell Newly Launched 5 combo 5G MIMO 700-3800MHz,GNSS High-precision Combination Antenna AN.4MIMO.700.3800.4C.1GNSS
- Nisshinbo will start production of the NT1191 (LNA for Multi-band GNSS) and the NT1192 (LNA for 1.2-GHz-band GNSS), for high-precision GNSS in June
- Nisshinbo‘s High-gain GNSS LNA NJG1187A-A for L1/L2/L5/L6 Conforms to AEC-Q100 Grade 2, VDA 6.3
- ASB ASL122 ——a Flat Gain LNA To Be Suitable To GNSS Receiver Application
- The Introduction of Global Navigation Satellite System-GNSS
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
