XRA1201 / XRA1201P 16-BIT I²C / SMBUS GPIO EXPANDER

2021-11-23
●The XRA1201/1201P is a 16-bit GPIO expander with an I²C/SMBus interface. After power-up, the XRA1201 has internal 100K ohm pull-up resistors on each I/O pin that can be individually enabled. The XRA1201P has the internal pull-up resistors enabled upon power-up in case it is necessary for the inputs to be in a known state.
In addition, the GPIOs on the XRA1201/1201P can individually be controlled and configured. As outputs, the GPIOs can be outputs that are high, low or in three-state mode. The three-state mode feature is useful for applications where the power is removed from the remote devices, but they may still be connected to the GPIO expander.
As inputs, the internal pull-up resistors can be enabled or disabled and the input polarity can be inverted. The interrupt can be programmed for different behaviors. The interrupts can be programmed to generate an interrupt on the rising edge, falling edge or on both edges. The interrupt can be cleared if the input changes back to its original state or by reading the current state of the inputs.
The XRA1201/1201P are enhanced versions of other 16-bit GPIO expanders with an I²C/SMBus interface.
The XRA1201 is pin and software compatible with the PCA9535, TCA9535 and MAX7312. The XRA1201P is pin and software compatible with the CAT9555, PCA9555, TCA9555, MAX7311 and MAX7318.
The XRA1201/1201P are available in 24-pin QFN and 24-pin TSSOP packages.
●FEATURES
■1.65V to 3.6V operating voltage
■16 General Purpose I/Os (GPIOs)
■5V tolerant inputs
■Maximum stand-by current of 1uA at +1.8V
■I²C/SMBus bus interface
▲I²C clock frequency up to 400kHz
▲Noise filter on SDA and SCL inputs
▲Up to 32 I²C Slave Addresses
■Individually programmable inputs
▲Internal pull-up resistors
▲Polarity inversion
▲Individual interrupt enable
▲Rising edge and/or Falling edge interrupt
▲Input filter
■Individually programmable outputs
▲Output Level Control
▲Output Three-State Control
■Open-drain active low interrupt output
■Pin and software compatible with PCA9535, TCA9535, MAX7312 (XRA1201)
■Pin and software compatible with CAT9555, PCA9555, TCA9555, MAX7311 and MAX7318 (XRA1201P)
■3kV HBM ESD protection per JESD22-A114F
■200mA latch-up performance per JESD78B

MaxLinear

XRA1201XRA1201PXRA1201IL24TR-FXRA1201PIL24-FXRA1201IG24TR-FXRA1201PIG24TR-FXRA1201IL24-0A-EBXRA1201IG24-0A-EBXRA1201PIL24-0A-EBXRA1201PIG24-0A-EB

More

Part#

16-BIT I²C GPIO EXPANDER16-BIT SMBUS GPIO EXPANDEREvaluation Board

More

Personal Digital Assistants ]PDA ]Cellular Phones ]Data Devices ]Battery-Operated Devices ]Global Positioning System ]GPS ]Bluetooth ]

More

Datasheet

More

More

Please see the document for details

More

More

QFN;TSSOP

English Chinese Chinese and English Japanese

AUGUST 2020

REV.1.0.1

1.2 MB

- The full preview is over. If you want to read the whole 17 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: