XR77103-MoCA Triple-Output PMIC for MaxLinear MoCA Solutions
■The XR77103-MoCA PMIC is designed to power MaxLinear’s G.hn chipsets, the MoCA 2.0 MxL370x and MoCA 2.5 MxL371x along with a single port ethernet phy such as the GPY241. It features 3 high-efficiency synchronous buck regulators with integrated power switches and sequencing engine to provide the 0.9V, 1.8V, and 3.3V rails of the MoCA SoC. The 0.9V core rail is capable of supplying the 3A peaks demanded by the SoC(1) and is compatible with the SoC DVS control.
■The XR77103-MoCA can operate from 5V, 9V, and 12V powered systems with minimal required external components, and packaged in a 4x4mm QGN that provides the smallest size solution possible. With a nominal switching frequency of 560kHz, the regulators can also be synchronized to an external clock in applications where EMI control is critical. An internal supervisor circuit monitors each converter output and asserts PGOOD once sequencing is done, outputs are reported in regulation, and the reset timer expires. The polarity of the signal is active high.
●FEATURES:
■4.5V to 14V wide input supply voltage range
■Built-in MOSFET and synchronous rectifier
■High accuracy 0.9V reference (1%)
■Current-mode control with simple compensation circuit
■External synchronization
■Power good
■Protection
▲Thermal shutdown
▲Overvoltage transient protection
▲Overcurrent protection
■32-pin 4mm x 4mm TQFN package
|
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
TQFN |
|
English Chinese Chinese and English Japanese |
|
July 5, 2021 |
|
|
|
206DSR00 |
|
785 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.