ATtiny212/214/412/414/416 tinyAVR® 1-series Complete Datasheet

2021-11-23
● Introduction:
■ The ATtiny212/214/412/414/416 are members of the tinyAVR®1-series of microcontrollers, using the AVR® processor with hardware multiplier, running at up to 20 MHz, with 2/4 KB Flash, 128/256 bytes of SRAM, and 64/128 bytes of EEPROM in a 8-, 14-, and 20-pin package. The tinyAVR®1-series uses the latest technologies with a flexible, low power architecture, including Event System, accurate analog features, and Core Independent Peripherals (CIPs).
● Features:
■ CPU
▲ AVR® CPU
▲ Running at up to 20 MHz
▲ Single-cycle I/O access
▲ Two-level interrupt controller
▲ Two-cycle hardware multiplier
■ Memories
▲ 2/4 KB In-system self-programmable Flash memory
▲ 64/128 bytes EEPROM
▲ 128/256 bytes SRAM
▲ Write/erase endurance:
■ Flash 10,000 cycles
■ EEPROM 100,000 cycles
▲ Data retention:
■ 40 years at 55°C
■ System
▲ Power-on Reset (POR)
▲ Brown-out Detector (BOD)
▲ Clock options:
■ 16/20 MHz low-power internal RC oscillator
■ 32.768 kHz Ultra Low-Power (ULP) internal RC oscillator
■ 32.768 kHz external crystal oscillator
■ External clock input
▲ Single-Pin Unified Program and Debug Interface (UPDI)
▲ Three sleep modes:
■ Idle with all peripherals running for immediate wake-up
■ Standby
▲ Configurable operation of selected peripherals
■ Power-Down with full data retention
■ Peripherals
▲ One 16-bit Timer/Counter type A (TCA) with a dedicated period register and three compare channels
▲ One 16-bit Timer/Counter type B (TCB) with input capture
▲ One 12-bit Timer/Counter type D (TCD) optimized for control applications
▲ One 16-bit Real-Time Counter (RTC) running from an external crystal, external clock, or internal RC
oscillator
▲ Watchdog Timer (WDT) with Window mode, with a separate on-chip oscillator
▲ One USART with fractional baud rate generator, auto-baud, and start-of-frame detection
▲ One host/client Serial Peripheral Interface (SPI)
▲ One Two-Wire Interface (TWI) with dual address match
■ Philips I2C compatible
■ Standard mode (Sm, 100 kHz)
■ Fast mode (Fm, 400 kHz)
■ Fast mode plus (Fm+, 1 MHz)
▲ Analog Comparator (AC) with a low propagation delay
▲ 10-bit 115 ksps Analog-to-Digital Converter (ADC)
▲ 8-bit Digital-to-Analog Converter (DAC) with one external channel
▲ Multiple voltage references (VREF):
■ 0.55V
■ 1.1V
■ 1.5V
■ 2.5V
■ 4.3V
▲ Event System (EVSYS) for CPU independent and predictable inter-peripheral signaling
▲ Configurable Custom Logic (CCL) with two programmable look-up tables
▲ Automated CRC memory scan
▲ External interrupt on all general purpose pins
■ I/O and Packages:
▲ Up to 18 programmable I/O lines
▲ 8-pin SOIC150
▲ 14-pin SOIC150
▲ 20-pin SOIC300
▲ 20-pin VQFN 3x3 mm
■ Temperature Ranges:
▲ -40°C to 105°C
▲ -40°C to 125°C
■ Speed Grades:
▲ 0-5 MHz @ 1.8V – 5.5V
▲ 0-10 MHz @ 2.7V – 5.5V
▲ 0-20 MHz @ 4.5V – 5.5V

MICROCHIP

ATtiny212ATtiny214ATtiny412ATtiny414ATtiny416tinyAVR®1-seriesATtiny212-SSNRATtiny212-SSNATtiny212-SSFRATtiny212-SSFATtiny214-SSNRATtiny214-SSNATtiny214-SSFRATtiny214-SSFATtiny412-SSNRATtiny412-SSNATtiny412-SSFRATtiny412-SSFATtiny414-SSNRATtiny414-SSNATtiny414-SSFRATtiny414-SSFATtiny416-MNRATtiny416-MFRATtiny416-SNRATtiny416-SNATtiny416-SFRATtiny416-SF

More

Part#

microcontrollers

More

More

Datasheet

More

More

Please see the document for details

More

More

SOIC;VQFN

English Chinese Chinese and English Japanese

12/2020

Rev. A

DS40002287A

4.6 MB

- The full preview is over. If you want to read the whole 585 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: