DWM1004C transceiver IC PRODUCT BRIEF
■The DWM1004C is specifically designed for TDoA tag applications but flexible enough to be used in a variety of UWB scenarios. The DWM1004C is an ideal TDoA tag solution ready for production
■The module integrates a Multiband UWB antenna, RF circuitry, STM32L041G6U6S Cortex-M0+ with AES and a LIS3DH motion sensor for smart power management and adaptive blink rate
■The DWM1004C module is based on Deca wave's DW1000 Ultra Wideband (UWB) transceiver IC, which is an IEEE 802.15.4-2011 UWB implementation
■Deca wave open source TDoA Tag firmware (Keil and Eclipse) supporting configurable adaptive blink rate motion detection support
■Typical LoS range point-to-point: CH2 60m, CH5 40m
■Deep Sleep mode current <4uA
■Battery life >2 years using 500mAh battery, TDoA blink @0.2Hz
■ISED/IC: 23794-DWM1004 CH5 Only and FCC ID: 2AQ33-DWM1004 CH2 and CH5
■Small form factor 31mm x 16.5mm, castellation pitch 1.27mm
■Recommended sale price is $9.95 in 10k quantities
●Features
■Hardware:
▲Low cost module for high volume industrial applications
▲Low-power hardware design and software architecture
▲Designed for TDoA but flexible for any UWB applications
▲Full RF design validated, tested and calibrated
■Certification (planned):
▲2 UWB frequency bands, CH2, 4GHz and CH5, 6.5GHz
▲6.8 Mbit/s data rate, PRF64MHz, Preamble 128us
■Firmware:
▲TDoA Tag source code, CH2 and CH5, 6.8Mbps data rate
▲Configurable adaptive blink rate accelerometer support
▲Production test and certification source code provided
▲Simple TWR code example provided
▲Keil and Eclipse based projects
Supplier and Product Introduction |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
2019 Dec |
|
Version 1.1 |
|
|
|
309 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.