MS27100A, MS27101A, MS27102A, MS27103A Remote Spectrum Monitors Configuration Quick Start Guide

2021-11-03
●Introduction
■The following are the topics covered in this Quick Start Guide:
▲"Setting Up Windows 7 for a Static IP”
▲"Configuring for Dynamic IP through SCPI Commands”
▲"Setting Up Windows 7 for Dynamic IP”
▲"UDP Discovery Tool”
▲"Secure Mode”
▲"Supplemental Information”
■To communicate with the MS2710xA Remote Spectrum Monitor (RSM) or to change its IP configuration, a PC must be correctly set up to communicate with the instrument via a direct connection using a static IP. The sections in this guide explain using:
▲A Windows PC to directly communicate with the Anritsu spectrum monitor
▲SCPI commands for configuring the Ethernet and DNS settings
▲The Anritsu Windows network discovery tool to find the instrument IP address
■The remote spectrum monitor is shipped with the following default IP configuration:
DHCP: OFF (Static IP Address)
▲Static IP Address: 10.0.0.2
▲Static Subnet: 255.255.255.0
▲Static Gateway: 10.0.0.0
■Read the MS2710xA Product Information, Compliance, and Safety Guide (PN: 10100-00064) for important safety, legal, and regulatory notices.

ANRITSU

MS27100AMS27101AMS27102AMS27103A

More

Part#

Remote Spectrum Monitors

More

More

User's Guide

More

More

Please see the document for details

More

More

English Chinese Chinese and English Japanese

June 2019

Revision: D

10580-00414

1.4 MB

- The full preview is over. If you want to read the whole 20 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: