FAN1100-F085 Ignition Gate Driver IC
The FAN1100-F085 is designed to directly drive an ignition IGBT and control the current and spark event of the coil. The coil current is controlled via the input pin. When the input is driven high, the output of the FAN1100-F085 is enabled to turn on the IGBT and start charging the coil. The FAN1100-F085 will sink a current (IIN) into the input pin based on programmed current on the RA line.
■Features
●Signal Line Input Buffer
●Input spike filter
●Operation from Ignition or Battery line
●Ground shift tolerance +/- 1.5 V
●Programmable maximum dwell time
●Programmable Input Pull down current
●Control IGBT current limiting through Vsense pin
●Soft Shutdown following Max Dwell Time out
|
[ switch on coil ] |
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
SO8 |
|
|
English Chinese Chinese and English Japanese |
|
|
August,2018 |
|
|
Rev.3 |
|
|
FAN1100-F085/D |
|
|
387 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
