FAN1100-F085 Ignition Gate Driver IC
●Features
■Signal Line Input Buffer
■Input spike filter
■Operation from Ignition or Battery line
■Ground shift tolerance +/- 1.5 V
■Programmable maximum dwell time
■Programmable Input Pull down current
■Control IGBT current limiting through Vsense pin Soft Shutdown following Max Dwell Time out
●Description
■The FAN1100-F085 is designed to directly drive an ignition IGBT and control the current and spark event of the coil. The coil current is controlled via the input pin. When the input is driven high, the output of the FAN1100-F085 is enabled to turn on the IGBT and start charging the coil. The FAN1100-F085 will sink a current (IIN) into the input pin based on programmed current on the RA line.
■An input spike filter suppresses input signals of less then 13 μsec in duration. A Max Dwell timer is included in the FAN1100-F085 which will turn off the IGBT if the input stays active for longer than the programmed time. This time interval can be modified through an external capacitor on the CSSD pin. When the Max Dwell timer is exceeded, the FAN1100-F085 will enter a Soft-Shut-Down mode (SSD) slowly dropping the collector current by lowering the gate drive to the IGBT thereby discharging the coil such as to inhibit a spark event. Once the soft shutdown operation has started, any transitions on the input signal are ignored until after completion of the soft shutdown function. The FAN1100-F085 will also limit the collector current of the IGBT to Ic (lim) during charging. This again is done through the sense resistor in the emitter leg of the Ignition IGBT developing a signal input to the Vsense pin of the FAN1100-F085.
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
8-SOIC |
|
|
English Chinese Chinese and English Japanese |
|
|
Aug-2018 |
|
|
Rev.3 |
|
|
FAN1100-F085/D |
|
|
504 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
