STEVAL-IOM001V1 - IO-Link master evaluation board based on L6360 equipped with ST morpho connectors for STM32 Nucleo

2021-09-29
●Features
■ IO-Link master PHY based on L6360
■ Interrupt diagnostics pin
■ I²C and UART interface
■ SPI (slave) interface
■ 65 mA selectable (3.3 or 5.0 V) linear regulator
■ CQ (push-pull) and L+ (high side) switches
■ IQ additional IEC61131-2 type 1 digital input
■ L+ and CQ overload and overheating protections with non- dissipative cut -offf unction
■ QFN-26L (3.5x5x1 mm) package
■ Operating voltage range from 18 to 32.5 V
■ Additional high side switch for L+ heavy loads (IPS161H)
■ LEDs for status and diagnostics
■ Ground and VCC wire break protections
■ EMC compliance with IEC61000-4-2, IEC61000-4-3, IEC61000-4-5
■ Equipped with ST morpho connectors
■ CE certified
■ RoHS and China RoHS compliant
●Description
■The STEVAL-IOM001V1 evaluation board is based on the L6360 IO-Link master transceiver with physical layer compliant with IO-Link v1.1 specification.
■Together with the STSW-IOM001 example code, it provides an affordable and easy-to-use solution for the development of user applications, letting you easily evaluate the communication features and robustness of the L6360.
■You can also perform evaluation of multiple ports industrial IO-Link master modules by connecting up to four STEVAL-IOM001V1 with few solder bridge modifications.
■The STEVAL-IOM001V1 interfaces with the STM32 Nucleo microcontroller via UART and GPIO pins and is compatible with the Arduino UNO R3 (optional configuration)and ST morpho (default configuration) connectors.

ST

STEVAL-IOM001V1L6360STSW-IOM001STM32 Nucleo

More

Part#

IO-Link master evaluation board

More

Factory Automation ]

More

Datasheet

More

More

Please see the document for details

More

More

QFN-26L

English Chinese Chinese and English Japanese

23-Apr-2021

Rev 2

DB3632

232 KB

- The full preview is over. If you want to read the whole 6 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: