MSC8102 Packet Telephony Farm Card (MSC8102PFC) User’s Guide
The MSC8102PFC interfaces with a baseboard platform via its PTMC site (see Figure 1). The PTMC is a PCI Mezzanine Card (PMC) module that conforms to the PMC standard for Jn1 and Jn2 but uses Jn3 and Jn4 to support a variety of telecommunications interfaces. The PTMC site on the media gateway is configured similar to a PT3MC, a subset of the PTMC specification that supports UTOPIA, Ethernet Reduced Media-Independent Interface (RMII), and computer telephony bus interfaces on Jn3/4. An optional fifth connector (Jn5) is added to support the two MII interfaces supported by the MSC8101 device. Jn5 is a proprietary connector, effectively supporting an enhanced PTMC that is backward-compatible with existing PTMCs.
Data transfer on the board occurs primarily through 10/100 Mbps Ethernet (single RMII or dual MII interfaces) or UTOPIA and a computer telephony local bus through the PTMC connectors. Also, an I²C management interface is implemented through the PTMC J3 connector. Additional I/O interfaces include an HDI16, RS-232 port, and EOnCE JTAG TAP for debug. The MSC8102PFC interfaces with Freescale packet telephony enhanced PTMC baseboards such as the PDK demonstration system, as well as with standard customer PTMC type III baseboards.
Packet Telephony Farm Card 、 PCI telephony mezzanine card (PTMC) |
|
|
|
User's Guide |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
9/2005 |
|
Rev. 1 |
|
PTKIT8102UG |
|
2.3 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.