AC9** Series and TA9** Series Transducer Sensors IECEx Certificate of Conformity (IECEx SIR 15.0060X)
2021-09-13
●This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements.This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.
●Applicant: CTC - Connection Technology Center, Inc.
●Equipment: Transducer Sensors/AC9** Series and TA9** Series
●Type of Protection: Intrinsically Safe
●Marking: Ex ia IIC T3 -T4 Ga
■T3: Ta - -40°C to +121°C
■T4: Ta - -40°C to +80°C
●Applicant: CTC - Connection Technology Center, Inc.
●Equipment: Transducer Sensors/AC9** Series and TA9** Series
●Type of Protection: Intrinsically Safe
●Marking: Ex ia IIC T3 -T4 Ga
■T3: Ta - -40°C to +121°C
■T4: Ta - -40°C to +80°C
- +1 Like
- Add to Favorites
Recommend
More>
- Keysight and CTC advanced GmbH Collaborate to Test First Wi-Fi 6E Device
- Cell to Chassis – (CTC) Space- and Weight-Saving Solutions and Fast Acceleration
- OWON Has Demonstrated its XSA1000 Series, OWP-H, SPE Series, XDM Series in the 2023 Hong Kong Electronics Show
- Silicon Labs Announces Next Generation Series 3 Wireless Platform to Create a Smarter, More Efficient IoT
- Shindengen Adds JH Series and MG038 Series Large Capacity Three Phase Bridge Diodes
- ONPOW New Series- ONPOW61 Push Button Switch With Connector that Covers 16mm, 19mm, 22mm, and 25mm in Diameter
- Conductive Polymer Hybrid Aluminum Electrolytic Capacitors 80V products added to the HXA/HXB Series Radial lead type HSA/HSB Series commercialized
- Yangtze Microelectronics Introduces Integrated Inductors FTC Series and FEXL Series with a Thickness of 0.55mm
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.