Keysight UXR Oscilloscopes Software Release Notes
●Version 10.25.00607 (Release)
■Enhancements
◆Includes features and bug fixes from the 6.55.00401 and 6.55.00504 Infiniium Oscilloscope software.
◆Changes the reported oscilloscope temperature as a delta from the calibration temperature rather than as an absolute temperature.
◆Adds enhancements to support 802.3ck/OIF Reference Receiver. These include (1) 3-pole, 2-zero CTLE's with multiple gain stages, (2) 4'th order Butterworth noise reduction filter, (3) new CTL presets and (4) Vertical Eye Closure measurement.
◆Adds N2129RU bandwidth and memory options available to select rental partners.
◆Adds support for the D9020BDLP protocol bundle.
◆Increases the maximum bandwidth setting for the UXR0702AP and UXR0704AP models to 73.5GHz. Previously, the maximum bandwidth setting was 70GHz.
■Bug Fixes
◆Fixes bugs impacting the D9010EBSC IEEE 802.6 compliance test application.
◆Fixes a TIE filter error found when running the DisplayPort compliance test application.
◆Fixes an eye diagram screen shot issue found when running the D-PHY compliance application.
◆Fixes a probe head selection bug.
◆Fixes an issue in PCIe protocol decode with TS2 packets being labeled as “Unknown Packet.”
◆Prevents the “Offline” oscilloscope application installed on a PC from starting automatically after an OS reboot.
UXR0134A 、 UXR204A 、 UXR0254A 、 UXR0334A 、 UXR0402A 、 UXR0404A 、 UXR0502A 、 UXR0504A 、 UXR0592A 、 UXR0594A 、 UXR0702A 、 UXR0704A 、 UXR0252AP 、 UXR0254AP 、 UXR0402AP 、 UXR0404AP 、 UXR0592AP 、 UXR0594AP 、 UXR0702AP 、 UXR0704AP 、 UXR0802A 、 UXR0804A 、 UXR1002A 、 UXR1004A 、 UXR1102A 、 UXR1104A 、 UXR0051AP 、 UXR0164A |
|
|
|
Development Environment(Software/Firmware) |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
15 June 2020 |
|
|
|
|
|
405 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.