EV240x-B-01A SCT240x Evaluation Board User's Guide

2021-08-28
●DESCRIPTION
■The EV240x-B-01A Evaluation Board is designed to demonstrate the capabilities of SCT2400, high efficiency fully integrated synchronous step-down DCDC converter supporting up to 0.6A continuous output current from an input source from 4.5V to 40V. The SCT2400 features fixed 2MHz switching frequency, which minimizes the external off chip passive components size and reduces the output ripple to be lower than 0.1% of output when the output is 12V. With a minimum 100ns on-time of high-side MOSFET, the SCT2400 allows power conversion from high input voltage to low output voltage.
■The SCT2400 offers cycle-by-cycle current limit, thermal shutdown protection and input voltage under-voltage protection. The device is available in a 6-pin small profile TSOT23-6 package.
■This user's guide describes the characteristics, operation and the use of the EV240x-B-01A Evaluation Module including EVM specifications, recommended test setup, test result, schematic diagram, bill of materials, and the board layout.
●FEATURES:
■Wide Input Range: 4.5V-40V
■Up to 600mA Continuous Output Current
■Less than 0.1% Output Ripple at 12V Output
■0.8V ± 2.5% Feedback Reference Voltage
■Integrated 600mΩ High-Side and 300mΩ Low-Side Power MOSFETs
■Fixed Frequency 2MHz
■Pulse Skipping Mode (PSM) at Light Load
■90uA Quiescent Current in Sleep Mode
■100ns Minimum On-time
■1ms Internal Soft-start Time
■Over-Temperature Protection
■Available in an TSOT23-6 Package

SCT

SCT240xEV240x-B-01ASCT2400

More

Part#

Evaluation Boardsynchronous step-down DCDC converter

More

Industrial 24V Distributed Power Bus ]Power meter ]Elevator ]PLC ]Servo ]Automatic Control ]Automotive ]

More

User's Guide

More

More

Please see the document for details

More

More

TSOT23-6

English Chinese Chinese and English Japanese

2021/07/29

Rev1.0

973 KB

- The full preview is over. If you want to read the whole 7 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: