PBL-25/16.2, PBD-58/16.2K, PBD-58/16.2M 16.2V Ultracapacitor Modules User Manual

2021-08-23
● The Tecate Group 16.2V energy storage units are available in three models, PBL-25/16.2 (Figure 1), PBD-58/16.2K (Figure 2), and PBD-58/16.2M (Figure 3) with active balancing. All modules are provided with the ultracapacitor cells mounted to a PCB along with the balancing electronics. The actively balanced units employ a linear voltage-balancing scheme, whereby the cell-to-cell leakage is dependent on the imbalance of the individual cells. When the cells are in balance the quiescent current is low and the leakage current of the ultracapacitor cells defines the pack leakage. The PBD-58/16.2K and the PBL-25/16.2 assemblies are covered with plastic heat shrink adding to the mechanical integrity of the unit. The PBD-58/16.2M is contained within a rugged, aluminum enclosure. This provides further mechanical integrity with additional splash resistant protection.
● All three models may be connected in series as required for higher voltage applications- refer to isolation instructions in section 3.2.
● The active balance circuit uses a four wire unit-to-unit balancing cable to keep the individual cell voltage balanced throughout the series string. The unit-to-unit balancing cable is not used when units are placed in parallel. At no time should the balancing cable be connected across the jumpers of single pack.

TECATE

PBL-25/16.2PBD-58/16.2KPBD-58/16.2M

More

Part#

Ultracapacitor Modulesenergy storage units

More

More

User's Guide

More

More

Please see the document for details

More

More

English Chinese Chinese and English Japanese

2019/07/10

1.1 MB

- The full preview is over,the data is 2 pages -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: