AMP DUOPLUG 2.5 Connector System for Wire-to-Board Systems Catalogue
2021-08-23
●AMP DUOPLUG 2.5 Connector System
■The AMP DUOPLUG 2.5Connector System offers a complete printed circuit board system which is suitable for edge as well as female to header applications using the same female part.
■The top of the female contact is provided with an IDC slot, a technique which permits highspeed wire termination.
■Application tooling specially developed for this system can produce cable assemblies with connectors at one or both ends.
■The connector keying is produced with a cutting unit on the application tooling machine.
●AMP DUOPLUG 2.5 Mark IIIDC Connector System
■Tyco Electronics’newly developed AMP DUOPLUG 2.5 Mark II IDC connector system merges decades of experience in IDC technology, with the latest materials, processes and processing equipment.
■The design is based on the RAST 2.5 Standard as a direct and indirect connecting system for the PC board and component applications.
■The female connectors fit in existing RAST 2.5 headers and frames.
■The twisted contact, the design of the contact zone and the two IDC slots guarantee safe functioning and a current rating up to 2 A.
■The 7- and 12-strandedconductors are suitable for a wire range of 0.22 up to 0.35mm²(AWG 24 up to AWG22, AWM Style 1569/1007)with a max. insulation diameter of 1.6 mm.
■The cover provides very good contact protection and has openings for easy electrical inspection.
■We offer a complete range of termination equipment from the hand tool to the modular, fully-automatic IHM Mark III machine.
■The connector keying and colour marking is done with units on the workstation. AMP DUOPLUG 2.5 Mark II and AMP DUOPLUG Power can be processed with minimal set-up times on the same workstation.
●AMP DUOPLUG Power IDC Connector System
■The AMP DUOPLUG Power is a new economical IDC Connector System for safe and fast production of electrical connections.
■The design is based on the RAST 2.5 Standard as a direct and indirect connecting system for PC board and component applications.
■The female connectors fit in existing RAST 2.5 headers and frames.
■The twisted contact, the design of the contact zone and the two IDC slots ensure safe functioning and a current rating up to 6 A.
■The 7-stranded and multi-stranded conductors are suitable for a wire range of 0.35 mm²up to 0.5 mm²(AWG 22 up to AWG 20, AWM Style 1569/1007).
■The cover provides very good contact protection and has openings for easy electrical inspection.
■We offer a complete range of termination equipment from the hand tool to the modular fully-automatic IHM Mark III machine.
■The connector keying and colour marking is done with units on the workstation.
■AMP DUOPLUG Power and AMP DUOPLUG 2.5 Mark IIIDC connector systems are able to be processed with minimal set up time on the same workstation.
■The AMP DUOPLUG 2.5Connector System offers a complete printed circuit board system which is suitable for edge as well as female to header applications using the same female part.
■The top of the female contact is provided with an IDC slot, a technique which permits highspeed wire termination.
■Application tooling specially developed for this system can produce cable assemblies with connectors at one or both ends.
■The connector keying is produced with a cutting unit on the application tooling machine.
●AMP DUOPLUG 2.5 Mark IIIDC Connector System
■Tyco Electronics’newly developed AMP DUOPLUG 2.5 Mark II IDC connector system merges decades of experience in IDC technology, with the latest materials, processes and processing equipment.
■The design is based on the RAST 2.5 Standard as a direct and indirect connecting system for the PC board and component applications.
■The female connectors fit in existing RAST 2.5 headers and frames.
■The twisted contact, the design of the contact zone and the two IDC slots guarantee safe functioning and a current rating up to 2 A.
■The 7- and 12-strandedconductors are suitable for a wire range of 0.22 up to 0.35mm²(AWG 24 up to AWG22, AWM Style 1569/1007)with a max. insulation diameter of 1.6 mm.
■The cover provides very good contact protection and has openings for easy electrical inspection.
■We offer a complete range of termination equipment from the hand tool to the modular, fully-automatic IHM Mark III machine.
■The connector keying and colour marking is done with units on the workstation. AMP DUOPLUG 2.5 Mark II and AMP DUOPLUG Power can be processed with minimal set-up times on the same workstation.
●AMP DUOPLUG Power IDC Connector System
■The AMP DUOPLUG Power is a new economical IDC Connector System for safe and fast production of electrical connections.
■The design is based on the RAST 2.5 Standard as a direct and indirect connecting system for PC board and component applications.
■The female connectors fit in existing RAST 2.5 headers and frames.
■The twisted contact, the design of the contact zone and the two IDC slots ensure safe functioning and a current rating up to 6 A.
■The 7-stranded and multi-stranded conductors are suitable for a wire range of 0.35 mm²up to 0.5 mm²(AWG 22 up to AWG 20, AWM Style 1569/1007).
■The cover provides very good contact protection and has openings for easy electrical inspection.
■We offer a complete range of termination equipment from the hand tool to the modular fully-automatic IHM Mark III machine.
■The connector keying and colour marking is done with units on the workstation.
■AMP DUOPLUG Power and AMP DUOPLUG 2.5 Mark IIIDC connector systems are able to be processed with minimal set up time on the same workstation.
- +1 Like
- Add to Favorites
Recommend
More>
- ROHM Introduces New BD77502FVM 2-Channel High-Speed Ground Sense CMOS Op Amp
- Automotive Molded SMD Power Inductor—AMP Series with High Current Features, Low DC Resistance, and Better DC Bias
- ROHM‘s New Zero-Drift Op Amp with High Accuracy Regardless of Temperature Changes, Offering 9µV Input Offset Voltage
- Dual Op AMP and Voltage Reference HM4310, Designed to Regulate the Output Current and Voltage Levels of Switching Battery Chargers and Power Supplies
- AC to DC Converter 12V 15 Amp: Efficient Power Supply Solution with High Current Rating, Compact Design, Energy Efficiency, and Safety Features
- Runic‘s OP Amp RS622，Analog Switch RS2105 and Low-Consumption LDO RS3236 Apply in Finger Clip Oximeter
- ROHM Develops a New Op Amp that Minimizes Current Consumption, Improving Power Savings in Consumer and Industrial Equipment
- Runic‘s OP Amp RS8538and RS622, Low-Consumption LDO RS3236 Apply in Electronic Blood-Pressure Meter
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
