78K0/Kx2-L, 78K0/Ix2 8-bit Single-Chip Microcontrollers Flash Memory Programming (Programmer)

2020-12-28

Target Readers:This application note is intended for users who understand the functions of the 78K0/Kx2-L and 78K0/Ix2 and who will use these products to design application systems.
Purpose:The purpose of this application note is to help users understand how to develop dedicated flash memory programmers for rewriting the internal flash memory of the 78K0/Kx2-L and 78K0/Ix2.
The sample programs and circuit diagrams shown in this document are for reference only and are not intended for use in actual designins.
Therefore, these sample programs must be used at the user’s own risk.Correct operation is not guaranteed if these sample programs are used.
To rewrite the contents of the internal flash memory of the 78K0/Kx2-L, a dedicated flash memory programmer (hereafter referred to as the “programmer”) is usually used.
This Application Note explains how to develop a dedicated programmer.
The 78K0/Kx2-L incorporates firmware that controls flash memory programming.The programming to the internal flash memory is performed by transmitting/receiving commands between the programmer and the 78K0/Kx2-L via serial communication.

Renesas

78K0

More

Part#

8-bit Single-Chip Microcontrollers

More

More

Application note & Design Guide

More

More

Please see the document for details

More

More

English Chinese Chinese and English Japanese

August 2009

1st edition

U19735EJ1V0AN00

3.8 MB

- The full preview is over. If you want to read the whole 126 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: