CL2510 RF Transceiver USER MANUAL
The CL2510 transceiver is a frequency-hopping spread spectrum (FHSS) radio designed for license-free operation in 2.4GH ISM band. The radio sustains a standard asynchronous serial data stream between two or more radios out of the box. Housed in a compact and rugged die-cast enclosure, the radio is equipped to replace thousands of feet of serial cable.
The CL2510 is available with a male DCE RS-232 interface and 50mW of output power for use in the worldwide 2.4GHz ISM bands.
This document contains information about the hardware and software interface between a Laird Technologies CL2510 transceiver and an OEM Host. Information includes the theory of operation, specifications, interface definitions, configuration information and mechanical drawings.
Note: Unless mentioned specifically by name, the CL2510 modules will be referred to as “radio” or “transceiver”. Individual naming is used to differentiate product specific features. The host (PC/Microcontroller/Any device to which the CL2510 module is connected) will be referred to as “OEM Host” or “Host.
KEY FEATURES:
Easy to USE:
• Standard male DB-9 DCE RS232 serial interface
• Standard baud rates supported from 1200 to 230,400 bps
• RF data rates of 280kbps or 500kbps, selectable
• Advanced configuration using AT commands
Networking and Security:
• Retries and acknowledgements
• Frequency hopping spread spectrum for security and interference rejection
• Customizable RF channel and system ID
• Automatic link synchronization
• Low latency and high throughput
|
|
User's Guide |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
06/20/11 |
|
Version 1.4 |
|
|
|
3.6 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.