SKY5®-8096-11 SkyOne® LiTE Mid-Band and High-Band Front-End Module for 3G, 4G, and 5G Applications PRODUCT SUMMARY
■The SKY58096-11 Mid-Band and High-Band Front-End Module (FEM) supports 3G / 4G / 5G mobile devices and operates efficiently in 3G / 4G /5G modes. The module includes separate 3G / 4G / 5G PA blocks operating in the mid-bands and high-bands, a silicon controller containing the MIPI®RFFE® interface, RF band switches, MB and HB antenna switches, bi-directional couplers, and integrated filters for Bands 1, 2, 3, 7, 32, 34, 39, 40, and 41. RF I/O ports are internally matched to 50 Ω to minimize the need for external components. Extremely low leakage current maximizes device standby time.
■The IC die and passive components are mounted on a multi-layer laminate substrate. The 62-pad LGA assembly, encapsulated in an 8.6 mm x 6.5 mm x 0.65 mm SMT plastic package, offers a highly manufacturable and low-cost solution.
■The SKY58096-11 module is designed to meet stringent 5G NR and LTE advanced requirements where wider bandwidth (100 MHz) and carrier aggregation are utilized for higher data rates. The combined filtering, RF matching, and TRx internal switching optimize performance for popular downlink (DL) CA band combinations in a compact, low-cost solution. The module contains all necessary components between the antenna and RFIC transceiver and is optimized for superior Rx sensitivity and Tx efficiency. Two ANT ports provide best flexibility to support multiple ANT configurations and ANT swap function. For the Uplink, the PA blocks support very wide bandwidth 5G NR operations up to 60 MHz for n1, n3, n7 and up to 100 MHz for n41.
●Features：
■MIPI® RFFE 2.1 control interfaces with 1.2 V / 1.8 V nominal supply
■Supports envelope tracking (ET) operation
■Two ANT output ports support flexible ANT configurations and swap
■Integrated hexaplexer filter for Bands 1, 3, 32, and 40
■Integrated duplexers for Bands 2 and 7
■Integrated diplexer filter for Bands 34 and 39
■Integrated filter for Band 41F
■Two auxiliary MB Tx outputs for external filters and one auxiliary HB Tx output for external filter
■Three auxiliary TRx ports to support additional bands
■Auxiliary mid-band antenna switch input for 2G Tx output from low-band module
■Integrated bi-directional RF coupler with cascade support
■All RF I/O ports matched to 50 Ω impedance
■Small, low-profile package:
▲8.6 mm x 6.5 mm x 0.7 mm (max)
▲62-pad Large Grid Array (LGA) configuration
|
[ Multi-band 3G / 4G / 5G mobile devices ][ Handsets ][ data cards ][ M2M ][ LTE advanced carrier aggregation (CA) ] |
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
LGA |
|
|
English Chinese Chinese and English Japanese |
|
|
February 14, 2020 |
|
|
|
|
|
|
|
|
207 KB |
- +1 Like
- Add to Favorites
Recommend
- Silicon Labs and Skyworks reach agreement to sell infrastructure and automotive business
- R＆D Center of Kangxi Communication Technologies (Shanghai) Co., Ltd Was Successfully Identified as Shanghai Enterprise Technology Center
- CHIPBETTER has become one of the 52 candidates with the most growth potential in China‘s IC Billboard, deeply cultivating 5G RF chip industry
- Considerations in Wi-Fi 6 AP Design
- Satellite GNSS Timing Solution
- Frequency Bands Suitable for Satellite Communications
- The Introduction of Global Navigation Satellite System-GNSS
- What is the Difference Between Ka-band and Ku-band in Satellite Communications?
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
