NCL30125FW300WGEVB 300 W Lighting Solution with NCL30125 Evaluation Board User's Manual
This user’s manual provides elementary information about a two−switch forward converter built with the NCL30125 operated in current−mode control. This controller offers many features to build an energy efficient converter with all the needed protections like cycle−by−cycle current limit with a 500−mV sense voltage, over temperature protection with a dedicated NTC pin and brown−out feature. In addition to the low side MSOFET drive, the controller integrates also a high−side section to drive the floating N−channel power MOSFET. Dedicated pins are available to adjust the switching frequency (RT pin– pin 6) or the soft−start duration (SS pin – pin 7). Finally, a high−voltage current source with Dynamic−Self Supply(DSS) is embedded to quickly start the power supply and maintain the Vcc voltage in light load or standby. The primary−side section drives a transformer whose primary inductance is 3 mH. The energy accumulated in this inductance is sending back to the bulk capacitor thanks to the freewheel components. One of the classical freewheel diode has been replaced by a MOSFET Q3 driven by the controller in order to refresh the bootstrap capacitor. The current is sensed via a 83−mW resistance. The switching frequency of 100 kHz and the soft−start duration are set by two individual components (R8 for fSW and C5 for SS). The power stage is made of two switching N−channel transistors Q1 and Q2. These two transistors are switched in same time and seen the input voltage as maximum. In these condary side, D13 and D15 constitute Rectifier and Freewheel part. The regulation is ensured by a TL431.
●Key Features
▲Two−Switch topology current mode control
▲A simple control circuit without a driver transformer
▲Rated Output power: 300 W
▲Standby power: <0.3 W in Universal AC input voltage
▲Full load Efficiency: >88% @ at board end, 230 Vac input
▲Completed protection: OCP, OVP
▲Brown−out protection
▲Switching frequency: ~100 kHz
Evaluation Board User's Manual |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
February, 2020 |
|
Rev. 0 |
|
EVBUM2714/D |
|
2.7 MB |
- +1 Like
- Add to Favorites
Recommend
- What Is The Third Generation Semiconductor?
- Corenergy Won the National Third-generation Semiconductor 2023-2024 Best New Enterprise Award
- A Strategic Partnership Established between Worldwide Leading Foundry X-FAB and A New Chinese SiC Rising Star - PN Junction Semiconductor
- Tata Consultancy Services and Renesas Partner to Open Innovation Center to Develop Next-Generation Semiconductor Solutions
- Ruimeng MS5148T 24-bit ADC Won the 2023 Electronic Information Semiconductor Industry Annual Excellent Product Award
- Nidec and Renesas Collaborate on Semiconductor Solutions for Next-Generation E-Axle for EVs
- Keysight Technologies and NCUOSC Establish Third-generation Semiconductor R&D and Test Open Laboratory
- Semipower Select Keysight‘s Power Device Testing Solution to Develop Next Generation Semiconductors
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.