SiT9501 Considerations for Measuring Phase Noise in Differential Oscillators
SiTime's differential oscillators feature excellent phase jitter performance for their respective class of products. For example, the SiT9501 oscillator features 70 fs rms of phase jitter, measured by integrating phase noise over an offset-frequency range of 12 kHz to 20 MHz. SiTime's differential oscillators employ a differential output driver with excellent power-supply noise rejection and an ultra-low output-noise floor. The differential driver also reduces common-mode noise sources internal to the device and power supply noise, as illustrated in Figure 1, leading to better than -170 dBc/Hz at a 156.25MHz clock frequency for the SiT9501. This document describes test methodologies to measure the true performance of the following ultra-low jitter devices using differential measurements.
differential oscillators 、 differential driver 、 differential output driver |
|
|
|
Application note & Design Guide |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
Sep 23, 2020 |
|
Rev 1.0 |
|
SiT-AN10067 |
|
268 KB |
- +1 Like
- Add to Favorites
Recommend
- [产品]日清纺300mA的稳压器R1526,输出电压范围为1.8~9.0V,具有过电流保护
- ept One27® SMT PCB Connectors with a Pitch of 1.27mm is Suitable for Board-to-board Applications ∣ video
- The Installation Advantages, Structural Features and Product Applications of WAGO‘s 2273 Series Compact Wire Connectors ∣ Video
- Greenconn荣获邓白氏企业认证,实力彰显行业领先水平
- [经验]瑞萨32位MCU RA2E1如何利用FSP工具生成sci_uart的配置代码
- RARA Would Like to Give Customers a “One-stop Solution” with All Kinds of Resistive Products
- ELETE Press-fit With High Electrical Reliability, Suitable For Communications, Automotive Electronics, Medical And Other Industries
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.