PC/104 and PC/104-Plus Connector Systems
■Testing was performed on the Tyco Electronics PC/104 and PC/104-Plus connector systems to determine their conformance to the requirements of Product Specification 108-1956 Revision B.
●Scope:
■This report covers the electrical, mechanical, and environmental performance of the PC/104 and PC/104-Plus connector systems. Testing was performed at the Engineering Assurance Test Laboratory between 03May01 and 21Jun01. The test file number for this testing is CTL B022115-009. Additional testing to verify the increase in durability cycles from 10 to 50 cycles was performed between 06Aug02 and 12Aug02.The test file number for this additional testing is CTLE 095-002.This documentation is on file at and available from the Engineering Assurance Test Laboratory.
●Conclusion:
■The PC/104 and PC/104-Plus connector systems listed in paragraph 1.5., conformed to the electrical, mechanical, and environmental performance requirements of Product Specification 108-1956 Revision B.
●Product Description:
■The PC/104 connector uses .025 inch square posts with .100 inch centerline spacing in 102 or 104 positions. The PC/104-Plus uses .020 inch square posts with 2 mm spacing in 120 positions. Both systems use either compliant pin technology or standard solder tails to terminate to .o62 inch thick printed circuit boards. Both systems were tested using both stackthrough and non-stackthrough styles.
|
|
Test Report |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
21Aug02 |
|
Rev A |
|
501-513 |
|
242 KB |
- +1 Like
- Add to Favorites
Recommend
- TE Connectivity to acquire antennas business from Laird Connectivity
- Wind Farms On-and Off-shore Reduces Installation Time with TE Connectivity’s New Easy-to-use High Voltage Joints (PHVJ)
- TE Connectivity Acquires Smart Grid Company Kries, Expanding TE’s Smart Grid Monitoring, Protection, Automation Capabilities
- TE Connectivity and Sekorm Reached A Strategic Cooperation on the Connector Business
- TE Connectivity‘s Raychem USB 3.1 cable provides up to 10 Gb/s data rates and Jacket elongation of 200% minimum
- TE Connectivity Acquires ERNI Group AG
- TE Connectivity Launches First-to-market SolderSleeve Device for Space
- TE Connectivity begins expansion of ERNI facility in Germany
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.