Linear Charger for Low Voltage Battery BD71631QWZEVK User’s Guide

2021-06-21
●Introduction: This user’s guide provides the necessary steps to operate the EVK of ROHM’s BD71631QWZ linear charger for low charge voltage battery. This include the external parts, operating procedures,and application data.
●Description: This EVK is for evaluating the linear charging IC BD71631QWZ, and charges 4.2V from the 5V input voltage. BD71631QWZ accepts a power supply input rangeof2.9V to 5.5V and generates a charging battery voltage ranging from 2.0V to 4.7V using external resistors.If the charging current is VIN ≥ 4 V, it can be used up to 300 mA under the condition of VIN-VOUT ≥ 1 V and up to 100 mA under the condition of VIN-VOUT ≥ 0.3 V. If 2.9 V ≤ VIN ≤ 5.5 V, it can be used up to 30 mA under the condition of VIN-VOUT ≥ 0.3 V. The charging current can be set with an external resistor. The termination current can be set from 50 μA to 10 mA using external resistors. Additional protection functions include a built-in Fixed 10-hour Safety Timer, UVLO (Under Voltage Lock Out), TSD (Thermal Shutdown Detection),and Battery Over Voltage Protection.

ROHM

BD71631QWZ-EVK-001BD71631QWZEVKBD71631QWZBD71631QWZ-E2BD71631QWZ EVK

More

Part#

Linear Chargerlinear charging IC

More

Low Voltage Battery ]Low Voltage Battery Products ]Li-ion 1Cell Battery Products ]

More

User's Guide

More

More

Please see the document for details

More

More

English Chinese Chinese and English Japanese

MAY.2021

Rev.001

64UG016E

1.4 MB

- The full preview is over. If you want to read the whole 14 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: