NCP1071: High-Voltage Switcher for Low Power Offline SMPS

2021-06-21
●The NCP1071 integrate a fixed frequency current mode controller with a 700 V MOSFET. Available in a PDIP-7 or SOT-223 package, the NCP1071 offers a high level of integration, including soft-start, frequency-jittering, short-circuit protection, skip-cycle, a maximum peak current set point, ramp compensation, and a Dynamic Self-Supply (eliminating the need for an auxiliary winding).
●Unlike other monolithic solutions, the NCP1071 is quiet by nature: during nominal load operation, the part switches at one of the available frequencies (65,100 or 130 kHz). When the output power demand diminishes, the IC automatically enters frequency foldback mode and provides excellent efficiency at light loads. When the power demand reduces further, it enters into a skip mode to
reduce the standby consumption down to a no load condition.
●Protection features include: a timer to detect an overload or a short-circuit event, Overvoltage Protection with auto-recovery and AC input line voltage detection.
●For improved standby performance, the connection of an auxiliary winding stops the DSS operation and helps to reduce input power consumption below 50 mW at high line.
■Features:
●Integrated 700 V MOSFET with RDS(on) of 22Ω
●Current-Mode Fixed Frequency Operation (65/100/130 kHz)
●Peak Current: NCP1071 = 350mA
●Skip-Cycle Operation at Low Peak Current
●Dynamic Self-Supply (DSS)
●Auto-Recovery Output Short Circuit Protection with Timer- Based Detection
●Frequency Foldback Operation
●300μA No Load Power Consumption
●Frequency Jittering (including during frequency foldback mode)
●AC Input Voltage Line Detection:
For more features, see the data sheet
■Benefits:
●Up to 20W output SMPS design capability
●Ability to scale for efficiency or size
●Adjust output current protection based on output power demand
●Eliminate acoustic noise
●Eliminate Aux winding
●Provides more robust protection without worrying about the coupling of the aux winding
●Improved efficiency at light load / Improved EMI over the entire load
●<50mW no Load Power Consumption
●Better EMI Signature Over the Entire Operating Range
●Enhanced Protection Against Faults With Low Input Voltage

ON Semiconductor

NCP1071P065GNCP1071P100GNCP1071P130GNCP1071STAT3GNCP1071STBT3GNCP1071STCT3GNCP1071

More

Part#

High-Voltage Switcher

More

Auxiliary ]Standby Isolated Power Supplies ]White Goods ]Smart Meter ]E-Meter ]

More

Datasheet

More

More

Please see the document for details

More

More

PDIP-7;SOT-223-4;TO-261-4D

English Chinese Chinese and English Japanese

5/20/2021

157 KB

- The full preview is over,the data is 2 pages -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: