MAX9765/MAX9766/MAX9767 50mW Audio Amplifiers with Headphone Amp, Microphone Preamp, and Input Mux
■The MAX9765/MAX9766/MAX9767 family combines speaker, headphone, and microphone amplifiers, all in a small thin QFN package. The MAX9765 is targeted at stereo speaker playback applications and includes a stereo bridge-tied load (BTL) speaker amp, stereo headphone amp, single-ended output mic amp, input MUX, and I²C control. The MAX9766 is targeted at mono speaker playback applications and includes a mono BTL speaker amp, stereo headphone amp, differential output mic amp, input MUX, and I²C control. The MAX9767 is targeted at applications that do not require a headphone amp and includes a stereo BTL speaker amp, differential output mic amp, and parallel control.
■These devices operate from a single 2.7V to 5.5V supply. A high 95dB PSRR allows these devices to operate from noisy supplies without additional power conditioning. An ultra-low 0.003% THD+N ensures clean, low distortion amplification of the audio signal. Click-and-pop suppression eliminates audible transients on power and shut-down cycles.
■In speaker mode, the amplifiers can deliver up to 750mW of continuous average power into a 4Ω load. In headphone mode, the amplifier can deliver up to 65mWof continuous average power into a 16Ω load. The gain of the amplifiers is externally set, allowing maximum flexibility in optimizing output levels for a given load. The MAX9765/MAX9766 also feature a 2:1 input multiplexer, allowing multiple audio sources to be selected. The various functions are controlled by either an I²C-compatible (MAX9765/MAX9766) or simple parallel control interface (MAX9767).
■All devices include two low-noise microphone preamps, a differential amp for internal microphones, and a single-ended amplifier for additional external micro-phones. A microphone bias output is provided, reducing external component count.
■The MAX9765/MAX9766/MAX9767 are available in a thermally efficient 32-pin thin QFN package (5mm×5mm×0.8mm). All devices have short-circuit and thermal-overload protection (OVP) and are specified over the extended -40°C to +85°C temperature range.
●Features
■750mW BTL Stereo Speaker Amplifier
■65mW Stereo Headphone Amplifier
■2.7V to 5.5V Single-Supply Operation
■Click-and-Pop Suppression
■Low 0.003% THD+N
■Low Quiescent Current: 13mA
■Low-Power Shutdown Mode: 5μA
■MUTE Function
■Headphone Sense Input
■Stereo 2:1 Input Multiplexer
■Optional 2-Wire, I²C-Compatible, or Parallel Interface
■Small 32-Pin Thin QFN (5mm×5mm×0.8mm)Package
●Applications
■PDA Audio Systems
■Tablet PCs
■Cell Phones
■Notebooks
■Digital Cameras
MAX9765 、 MAX9766 、 MAX9767 、 MAX9765ETJ 、 MAX9766ETJ 、 MAX9767ETJ |
|
[ PDA Audio Systems ][ Tablet PCs ][ Cell Phones ][ Notebooks ][ Digital Cameras ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
TQFN-EP |
|
English Chinese Chinese and English Japanese |
|
3/07 |
|
Rev 2 |
|
19-2862 |
|
858 KB |
- +1 Like
- Add to Favorites
Recommend
- How to Maximize Energy Efficiency with EFM32 Gecko MCUs?
- How to Maximize Bluetooth® Interoperability Between IoT Devices and Smartphones?
- ROHM Establishes Ultra-High-Speed Control IC Technology that Maximizes the Performance of GaN Devices
- Maximize Efficiency and Flexibility with a Modular Power Supply for Your PC
- Silicon Labs’ Product Portfolio Maximizes New Bluetooth 5.4 Features, Facilitating IoT Applications Development
- Maximize Network Performance with 4G LTE Modem Advanced Automation Terminal
- ROHM Developed a New Ultra-High-Speed Gate Driver IC BD2311NVX-LB Maximizing the Performance of GaN Devices
- ATP Rapid Diagnostic Test (RDT): Accelerating Failure to Maximize Reliability and Endurance
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.