RF-TI1352B1 Low-power Sub-1G + 2.4 G Dual-band Multi-Protocol Module
■RF-TI1352B1 is an RF module based on TI lower-power SoCCC1352R. It integrates a 48 MHz and a 32.768 kHz crystal, a 256 KB ROM, a 352 KB Flash,and two IPEXs to guarantee the external antenna connection.Its ARM®Cortex®-M4F core application processor can operate at extremely low current at flexible power modes.It features small size, robust connection distance, and rigid reliability. It supports Sub GHz and 2.4 GHz multi-protocoland can be preprogrammed with a serial interface communication protocol for Thread, ZigBee, BLE5.0 and TI 15.4-Stack (Sub 1GHz).1.27-mm pitch stamp stick package for easy assembling and cost-effective PCB design.
●Key Features:
■Microcontroller-Powerful 48 MHz ARM®Cortex®-M4F processor
▲352 of in-system programmable flash
▲256 KB of ROM for protocols and library functions
▲8 KB of Cache SRAM
▲80 KB 0f ultra-low leakage SRAM.
▲Supports OTA upgrade
■Peripherals
▲Digital peripherals can be routed to 28 GPIOs
▲12-Bit ADC, 200 k Samples/s, 8 channels
▲2× UART
▲2×SPI
▲I²C
▲ I²S
▲2×comparators with internal reference DAC (1 ×continuous time, 1 ×ultra-low power)
■Radio Section-Suitable for systems targeting complicance with worldwide radio frequency regulations：ISM Sub 1GHz (433 MHz, 868 MHz, 915 MHz) + 2.4 GHz
▲Multi-protocol supports of Sub 1GHz and 2.4 GHz: Thread, ZigBee, BT5.0 and IEEE 802.15.4 PHY and MAC
■Low Power
▲Wide supply voltage range 1.8V ~ 3.8V
▲Active-mode RX: 5.8 mA (3.6 V, 868 MHz),6.9 mA (3.0 V, 2.4 GHz
▲Active-Mode TX 0 dBm: 8.0 mA (3.6 V,868 MHz), 7.1 mA (3.0 V, 2.4 GHz)
▲Active-Mode TX at +14 dBm: 24.9 mA(868 MHz)
▲Active-Mode MCU 48 MHz (CoreMark):2.9 mA (60 μA/MHz)
▲Sensor Controller, Low Power-Mode, 2 MHz,running infinite loop: 30.8 μA
▲Sensor Controller, Active-Mode, 24 MHz,running infinite loop: 808 μA
▲Standby: 0.85 μA (RTC on, 80KB RAM andCPU retention)
▲Shutdown: 150 nA (wakeup on external events)
|
RF-TI1352B1 、 RF-SM-1044B4 、 RF-SM-1077B1 、 RF-SM-1077B2 、 RF-SM-1044B1 、 RF-SM-1044B2 、 CC1310F128RGZ 、 CC1310F128RSM 、 CC1352R 、 CC131X |
|
|
[ Home automation ][ Smart plug and metering ][ Home appliances ][ Sensor nodes ][ Security systems ][ Industrial control ][ Wearables ][ Building automation ][ Sensor networks ][ Medical devices ][ Gaming controller ][ Remote controls ] |
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
SMT |
|
|
English Chinese Chinese and English Japanese |
|
|
2020.04.09 |
|
|
V1.0 |
|
|
|
|
|
1.7 MB |
- +1 Like
- Add to Favorites
Recommend
- RF-STAR Launched a Sub-1 GHz+2.4 G Dual-band Multi-protocol SMD Wireless Module Developed Based on CC1352R
- RF-STAR RF-DG-40A Dongle——In-Depth Analysis of the Improvement of Nordic‘s Dongle Based on nRF52840
- RF-STAR’s New Modules Adopt NRF52833 Chip Will Come Soon
- RF-STAR Has Launched RF Modules Support Zigbee, BLE, Thread, and Other Multi-protocol Operations
- RF-STAR Launched The CC2640R2L Module With A Lower Cost And High Performance
- RF-DG-32A USB Sniffer Based on NRF52832 Chip Launched by RF-STAR , Which Supports Major Wireless Standards
- RF-STAR‘s Active Bluetooth IC Card Enables Gas Recharging at Home
- RF-star’s Development Kits of CC2340 BLE Modules Accelerate Projects
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
