RA6M1 Group Evaluation Kit for RA6M1 Microcontroller Group EK-RA6M1 v1 User’s Manual
●Renesas RA6M1 Microcontroller Group
■R7FA6M1AD3CFP
■100-pin LQFP package
■120 MHz Arm® Cortex®-M4 core with Floating Point Unit (FPU)
■256 KB SRAM
■512 KB code flash memory
■8 KB data flash memory
●Connectivity
■A Device USB connector for the Main MCU
■S124 MCU-based SEGGER J-Link® On-Board interface for debugging and programming of the RA6M1 MCU. A 10-pin JTAG/SWD interface is also provided for connecting optional external debuggers and programmers.
■Two PMOD connectors, allowing use of appropriate PMOD compliant peripheral plug-in modules for rapid prototyping
■Pin headers for access to power and signals for the Main MCU
●Multiple clock sources
■Main MCU oscillator crystals, providing precision 12.000 MHz and 32,768 Hz external reference clocks
■Additional low-precision clocks are available internal to the Main MCU
●MCU reset push-button switch
●MCU boot configuration jumper
●General purpose I/O ports
■One jumper to allow measuring of Main MCU current
■Copper jumpers on PCB bottom side for configuration and access to selected MCU signals
●Operating voltage
■External 5 V input through the Debug USB connector supplies the on-board power regulator to power logic and interfaces on the board. External 5 V or 3.3 V may be also supplied through alternate locations on the board.
●A two-color board status LED indicating availability of regulated power and connection status of the J-Link interface
●A red User LED, controlled by the Main MCU firmware
●A User Push-Button switch, User Capacitive Touch Button sensor, and an optional User Potentiometer, all of which are controlled by the Main MCU firmware
RA6M1 Group 、 RA6M1 、 EK-RA6M1 、 RA Family 、 RA6 Series 、 RTK7EKA6M1S00001BU 、 R7FA6M1AD3CFP 、 R7FS124773A01CFM#AA0 、 RA6 、 RA |
|
|
|
User's Guide |
|
|
|
Please see the document for details |
|
|
|
|
|
LQFP |
|
English Chinese Chinese and English Japanese |
|
Apr.09.20 |
|
Rev.1.01 |
|
R20UT4577EU0101 |
|
3.9 MB |
- +1 Like
- Add to Favorites
Recommend
- Renesas Extends RA MCU Family with RA6T1 MCU Group for Motor Control and AI-based Endpoint Predictive Maintenance
- Renesas Extends Arm Cortex-Based MCU Family with RA4M3 MCU Group for Industrial and IoT Applications
- Renesas Successfully Combines A Winning Combination with An Offline Voice Recognition Algorithm
- Renesas DSP Solution on Renesas Lab on the Cloud, Input Analog Signals Directly From A Signal Generator To The Rx231 Microcontroller Evaluation Board
- Renesas Expands RA MCU Family with New RA4 Entry-Line Group Offering Optimal Value with Balanced Low Power Performance and Feature Integration
- Renesas & Altran to Deploy First Social Distancing Wristwatch Using Ultra-Wideband Chipset with Low Rate Pulse
- Renesas and FAW Establish Joint Laboratory to Accelerate Development of Next-Generation Smart Vehicles
- Renesas Expands Low-Power Industrial and IoT Applications Reach With New RA4M2 MCU Group in Arm Cortex-Based MCU Family
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.