130B117003-E REGplus IP20 C6-A modul 180°M
●termination unit for mounting on TH35 rails to DIN EN 60715 in electrical distribution panels for home and industrial installations
●equipped with C6Amodul 180° RJ45 individual module
●cable feed 45° from the top, plug direction 45° downwards
●certified to GHMT Cat.6-A re-embedded PVP
●component testing for Cat.6-A to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09, TIA/EIA-568-C.2 (2009-08) and IEC 60603-7-51 Ed.1 (12/2008), certified to GHMT
●compliance with class E-A up to 500 MHz to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09
●tested: component up to 600 MHz, link up to 800 MHz
●suitable for 10 GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus, UPoE and 4PPoE) and HDBaseT
●easy to install connection of data lines AWG 26/1 to 22/1 (solid wire) and AWG 26/7 to 22/7 (stranded wire) to insulation displacement connectors (IDC)
●conductor assignment to T568A and T568B is directly printed on the stuffer cap
●migration to 25G-systems without special tools
●width of 1HP allows mounting up to 12 REG plus in standard electrical distribution panels
●when mounted as a device of protection class I, the equipotential bonding is realized directly over the top hat rail by means of an integrated equipotential plate. This has to be connected to the equipotential bonding of the building by means of a bonding terminal
●a cover protects the module against direct contact. If mounted in distributor panels with protective insulation, protection class II is guaranteed.In this case, it is necessary to remove the equipotential bonding spring.
●integrated dust protection cover (also colored)
130B117003-E 、 816979-0105-I 、 816979-0106-I 、 816979-0107-I 、 816979-0108-I 、 899011-01 |
|
[ 10 GBit Ethernet (IEEE 802.3an) ][ Remote Powering (PoE, PoE plus, UPoE and 4PPoE) ][ HDBaseT ][ Office ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
2019/10/25 |
|
Version: Z |
|
|
|
391 KB |
- +1 Like
- Add to Favorites
Recommend
- German connector brand METZ CONNECT reached a partnership with Sekorm
- METZ CONNECT Offers Customizable Smart Cabling Solution for Intelligent Meter Systems
- METZ CONNECT‘New OpDAT MTP® Cable Assemblies with Transmission Rates Up to 40 or 400GBit/s
- METZ CONNECT Connection Terminals Alternate to RJ45 Or M12 Connectors, Suitable For Industrial Ethernet Systems
- Control Cabinet Construction 4.0 – Digital Device Data from METZ CONNECT
- Reconnectable METZ CONNECT Terminals Suitable for IoT/IIOT Devices, up to 10 Gbit/s Data Transmission
- METZ CONNECT Joined the Single Pair Ethernet Industrial Partner Network with Its IEC 63171-6 SPE Connectors
- METZ CONNECT One And Two Port “APZ“ Junction Boxes Products With Feedthrough Couplings, Plug + Play Connection
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.