RH850/E2x-373BGA PiggyBack Board T2 Y-RH850-E2X-373PIN-PB-T2-V3
The PiggyBack board (Y-RH850-E2X-373PIN-PB-T2-V3) can be used as standalone board or can be mated with any mainboard (Y-RH850-X1X-MB-Tx-Vx or Y-RH850-X2X-MB-Tx-Vx) of the RH850 Evaluation Platform for extended functionality.
Main features:
●Target connector socket
●Standalone operation of the board
●Direct supply of device voltage (typ. 5V; 3.3V and 1.28V/1.12V*1) as well as generation of the core voltage (typ. 1 28V/1.12V*1) from an on-board voltage regulator
●Device programming capability
●Device debugging capability
●Pin headers for direct access to the functional device pins
●Reset switch
●MainOSC circuitry
●Connectors to Main board
●Operating temperature from 0°C to +40°C
This document describes the functionality provided by the PiggyBack board and guides the user through its operation.
For details regarding the operation of the microcontroller refer to the corresponding User's Manual.
|
|
User's Guide |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
2019-04-30 |
|
Rev. 1.0 |
|
V3R20UT4457ED0100 |
|
2.7 MB |
- +1 Like
- Add to Favorites
Recommend
- Renesas MCUs Can Rewrite The Update Software by Wireless Communication with OTA Technology
- Renesas and FAW Establish Joint Laboratory to Accelerate Development of Next-Generation Smart Vehicles
- Renesas RH850/C1M-Ax MCU Solves Complex Control Challenge in Integrated Dual Traction Inverter
- Renesas RH850 Series Contributes to the Realization of a Flying Motorcycle
- Renesas R-Car SoC and RH850 MCU to be Used in Honda SENSING System
- Renesas Expands Lineup of 28nm Cross-Domain Automotive Control Microcontrollers
- Pairing An R-Car SoC Microprocessor with RH850 and PMIC, System Solution for CoGW ECUs Can Be Realized
- Renesas DSP Solution on Renesas Lab on the Cloud, Input Analog Signals Directly From A Signal Generator To The Rx231 Microcontroller Evaluation Board
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.