RAA270005KFP General Purpose Power Management IC
The PMIC contains two types of DCDCs converters: buck and boost, two lowdropout linear regulators (LDO) and two linear trackers.
The switching frequency of boost/buck DCDCs are typical 420 kHz, 2.1 MHz respectively.
Monitor functions for the internal status are implemented. Input voltage, output of all regulators, and internal analog voltage corresponding to temperature can be monitored through ADC of MCU. And reference voltage can be monitored for testing the ADC of MCU as well.
The PMIC has sequencer circuits for controlling power-up/down, therefore any external sequencer circuits are unnecessary. And the PMIC can controlan external backup-power for MCU.
Features:
● Supply the power to Renesas RH850/P1x(eVR)
● Load dump robustness
● Input voltage range:
■6.6~18.5Vto perform specified characteristics.
■5.4V~: continued operation withoutlow voltage detection
■3.8V~: continued operation declined the output voltage
● DCDC converter:
■Boost: 6.0V/250mA (Input voltage: 2.2V~)
■Buck: 6.1V/600mA
● Linear regulators:
■ Output voltage : 3.3V/10mA
■ Output voltage : 5.0V/350mA with reverse protection
●Two linear trackers
■Output voltage: VOUT1/100mA with reverse protection
● Automatic power sequence
● An external backup-power control
● Watchdog timer
● Analog multiplexer
● Interrupt request
● Thermal shut down
● Reset generator
● External devices control
● Monitoring to a core voltage in MCU.
● Exposed die pad, HLQFP package, 40pin 9mm x 9mm
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
HLQFP |
|
English Chinese Chinese and English Japanese |
|
Apr. 9, 2018 |
|
Rev.1.00 |
|
R02DS0017EJ0100 |
|
2.7 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.