A1084 BIPOLAR LDO REGULATOR 5A BIPOLAR LINEAR REGULATOR
Other than fixed voltage versions (1.8V, 2.5V, 3.3V, 5.0V), A1084 has an adjustable voltage version, with which desired voltage can be achieved by setting the values of two external resistors of the application circuitry.
A1084 offers thermal shut down and current limit functions to assure the stability of chip and power system.
The A1084 is available in TO-252,TO-263-2 and TO-263-3 packages.
FEATURES:
●Fixed and adjustable versions.
●Maximum output current : 5A
●Maximum input voltage: 15V
●Line regulation: 0.2%(Typical)
●Load regulation: 0.2%(Typical)
●On-Chip Thermal Shutdown
●Operation environment Temperature:-40°C~ 85°C
●Available in TO-252, TO-263-2 and TO-263-3 packages
A1084 、 A1084DR-XX 、 A1084DVR-XX 、 A1084S2R-XX 、 A1084S2VR-XX 、 A1084S3R-XX 、 A1084S3VR-XX |
|
[ Computer Mother Board ][ Graphic Card ][ Battery Charger ][ Switching Supplies ][ Microprocessor Supply ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
TO-252;TO-263-2;TO-263-3 |
|
English Chinese Chinese and English Japanese |
|
APR 2020 |
|
REV1.3 |
|
|
|
1.3 MB |
- +1 Like
- Add to Favorites
Recommend
- AiT A6303 Series——300mA, Positive Voltage Output CMOS LDO Regulators
- AIT A6528A CMOS LDO Features A Low Voltage Difference and Is Available in SOT-25 and SOT89-5 Packages
- 512Kbit I²C Compatible Serial EEPROM AiT A24C512 Requires a Single Power Supply in the Range of 1.7V to 5.5V
- AiT A7545 current mode boost DC-DC converter with Adjustable Output up to 9V and Internal Fixed PWM frequency of 1MHz
- AiT A713 DC-to-DC Step-down Switching Regulator with High Efficiency of up to 95%, ideal for Low-voltage Power Conversions
- AiT Offers Wide Range of Highly Precise SMD/TH Crystal Components in Half Size, Full Size, Cylindrical and Tuning Fork Packages
- AiT Offers Compact SMD Power Inductors Available in SMD Size Range from 0602 to 1812
- AiT offers 1A Linear Li-ion Batteries Charger IC A4051 for Single-cell Lithium-ion Batteries
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.