A7530 DC-DC CONVERTER BOOST(STEP-UP) 0.8V STARTUP, 200mA 350KHz PFM CONTROL ASYNCHRONOUS
FEATURES:
●Minimal Number of External Components, Only an Inductor (AiT-PIA6045-270M), a Diode (AiT-B5819W), and a Capacitor
●Ultra Low Quiescent Current: 4uA
●±2% High Output Voltage Accuracy
●Output Range from 2.5V to 6.0V
●Deliver 200mA at 3.3V output voltage with 1.8V input Voltage
●Low start-up voltage, 0.8V at 1mA
●Low temperature-drift coefficient of the output voltage ±100ppm/°C
●85% High Power Conversion Efficiency
●Available in SOT-23,SOT-25 and SOT89-3 packages
A7530E3R-XXY 、 A7530E3VR-XXY 、 A7530E5R-XXY 、 A7530E5VR-XXY 、 A7530K3R-XXY 、 A7530K3VR-XXY |
|
[ Power Source for Battery-Powered Equipment ][ Power Source for Camera ][ Camcorder ][ VCT ][ PDA ][ Pager ][ Electronic Data Bank ][ Hand-Held Communication Equipment ][ Audio Equipment ][ Power Source for Applications which require higher voltage than that of batteries used in the appliances ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
SOT-23;SOT-25;SOT89-3 |
|
English Chinese Chinese and English Japanese |
|
MAY 2020 |
|
REV3.2 |
|
|
|
1.4 MB |
- +1 Like
- Add to Favorites
Recommend
- AiT A6303 Series——300mA, Positive Voltage Output CMOS LDO Regulators
- 512Kbit I²C Compatible Serial EEPROM AiT A24C512 Requires a Single Power Supply in the Range of 1.7V to 5.5V
- AiT A7545 current mode boost DC-DC converter with Adjustable Output up to 9V and Internal Fixed PWM frequency of 1MHz
- AiT A713 DC-to-DC Step-down Switching Regulator with High Efficiency of up to 95%, ideal for Low-voltage Power Conversions
- AiT Offers Wide Range of Highly Precise SMD/TH Crystal Components in Half Size, Full Size, Cylindrical and Tuning Fork Packages
- AiT Offers Compact SMD Power Inductors Available in SMD Size Range from 0602 to 1812
- AiT offers 1A Linear Li-ion Batteries Charger IC A4051 for Single-cell Lithium-ion Batteries
- AiT‘s A7115B: a 1.5A, 2MHz High Efficiency Buck DC-DC Converter for Powering Portable Equipment
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.