UG432: BGM220P Wireless Gecko Module Starter Kit User's Guide
BRD4311A contains the BGM220P Module, and it is a plug-in board for the WirelessStarter Kit Mainboard.
The Wireless Starter Kit Mainboard contains an on-board J-Link debugger with a PacketTrace Interface and a virtual COM port, enabling application development and debuggingthe attached radio board as well as external hardware. The mainboard also containssensors and peripherals for easy demonstration of some of the BGM220P's many capabilities.
This document describes how to use the BRD4311A Radio Board together with a Wireless Starter Kit Mainboard.
The BGM220P Wireless Gecko Module is featured on a radio board that plugs directly into a Wireless Starter Kit (WSTK) Mainboard.The mainboard features several tools for easy evaluation and development of wireless applications. An on-board J-Link debugger ena-bles programming and debugging on the target device over USB or Ethernet. The Advanced Energy Monitor (AEM) offers real-timecurrent and voltage monitoring. A virtual COM port interface (VCOM) provides an easy-to-use serial port connection over USB or Ether-net. The Packet Trace Interface (PTI) offers invaluable debug information about transmitted and received packets in wireless links.
All debug functionality, including AEM, VCOM and PTI, can also be used towards external target hardware instead of the attached radioboard.
To further enhance its usability, the mainboard contains sensors and peripherals that demonstrates some of the many capabilities ofthe BGM220P. A 20-pin expansion header (EXP header) is also provided that allows connection of expansion boards (EXP boards) tothe kit.
BRD4311A RADIO BOARD FEATURES:
• BGM220P Wireless Gecko PCB Module with 512 kB Flash, 32 kB RAM. Fully integrated chip antenna, RF matching network, crystals, and decoupling apacitors (BGM220PC22HNA2).
• 8 Mbit low-power serial flash for over-the-air upgrades
WIRELESS STK MAINBOARD FEATURES:
• Advanced Energy Monitor
• Packet Trace Interface
•Virtual COM Port
• SEGGER J-Link on-board debugger
• External device debugging
• Ethernet and USB connectivity
• Silicon Labs Si7021 Relative Humidity andTemperature sensor
• Low Power 128x128 pixel Memory LCD
• User LEDs / Pushbuttons
• 20-pin 2.54 mm EXP header
• Breakout pads for Module I/O
• CR2032 coin cell battery support
BGM220P 、 BRD4311A 、 SLWSTK6103A 、 SLWRB4311A 、 BGM220x 、 BRD4001A 、 BRD4310A 、 BGM220S 、 BRD8010A |
|
Wireless Gecko Module Starter Kit 、 Wireless Starter Kit 、 Radio Board 、 Wireless Gecko PCB Module 、 Wireless Gecko Module Radio Board |
|
|
|
User's Guide |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
July, 2020 |
|
Rev. 1.0 |
|
UG432 |
|
3 MB |
- +1 Like
- Add to Favorites
Recommend
- Silicon Labs‘ Smart Retail Technology Featured at‘National Retail Federation (NRF) 2022: Retail‘s Big Show’
- New Silicon Labs Modules Provide Pre-Certified Wireless Connectivity for A Broad Range of IoT Applications
- Silicon Labs Simplifies IoT Development with Simplicity Studio 5
- Silicon Labs Strengthens Isolated Gate Driver Portfolio
- Software Speeds Development of IEEE 1588 System Integration | Silicon Labs
- Filo Leverages Silicon Labs Bluetooth Modules for Life-Saving Baby Car Seat Alarm
- News | Silicon Labs and Amazon Collaborate on Sidewalk, a New Shared Network for IoT Consumer Devices
- Silicon Labs Expands Isolated Gate Driver Product Family Ideal for Hybrid and Electric Vehicles (EV)
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.