FT801 Embedded Video Engine Datasheet
●The FT801 is an easy to use graphic controller targeted for embedded applications to generate high-quality Human Machine Interfaces (HMIs). It has the following features:
■FT801 functionality includes graphic controller, audio processing, and capacitive touch controller interface.
■Compatibility mode allows display code to be run on FT801 or FT800. Extended mode enables multi-touch capabilities for FT801.
■Embedded Video Engine (EVE) with widget support can offload the system MPU and provide a variety of graphic features
■Built-in graphics operations allow users with little expertise to create high-quality display
■Support capacitive touch screen with up to 5 touches detection
■Hardware engine can recognize touch tags and track touch movement. It provides notification for up to 255 touch tags.
■Enhanced sketch processing
■Programmable interrupt controller provides interrupts to host MPU/MCU
■Built-in 12MHz crystal oscillator with PLL providing 48MHz or 36MHz system clock
■Clock switch command for internal or external clock source. External 12MHz crystal or clock input can be used for higher accuracy.
■Video RGB parallel output (default RGB data width of 6-6-6) with 2 bit dithering; configurable to support resolution up to 512x512 and R/G/B data width of 1 to 6
■Programmable timing to adjust HSYNC and VSYNC timing, enabling interface to numerous displays
■Support for LCD display in WQVGA (480x272) and QVGA (320x240) formats with data enable (DE) support mode and VSYNC/HSYNC mode
■The FT801 calculates for 8-bit colour despite only providing pins for 6-bit (RGB-6,6,6); this improves the half tone appearance
■Display enable control output to LCD panel
■Mono audio channel output with PWM output
■Built-in sound synthesizer
■Audio wave playback for mono 8-bit linear PCM, 4-bit ADPCM and µ-Law coding format at sampling frequency from 8 kHz to 48 kHz.Built-in digital filter reduces the system design complexity of external filtering
■PWM output for backlight dimming control for LED
■Low power consumption for portable application, 24mA active (typical) and 250 uA sleep (typical)
■No frame buffer RAM required
■Advanced object oriented architecture enables low cost MPU/MCU as system host using I²C and SPI interfaces
■Power mode control allows chip to be put in power down, sleep and standby states
■Supports host interface I/O voltage from 1.8V to 3.3V
■Standard serial interface to host MPU/MCU with SPI up to 30MHz or I²C clocking up to 3.4MHz
■Internal voltage regulator supplies 1.2V to the digital core
■-40℃ to 85℃ extended operating temperature range
■Available in a compact Pb-free, VQFN-48, 7mm X 7mm X 0.9mm package, RoHS compliant
|
[ Point of Sales Machines ][ Multi-function Printers ][ Instrumentation ][ Home Security Systems ][ Graphic touch pad ][ dial pad ][ Tele Conference Systems ][ Video Conference Systems ][ Phones ][ Switchboards ][ Medical Appliances ][ Blood Pressure displays ][ Heart monitors ][ Glucose level displays ][ Breathalyzers ][ Gas chromatographs ][ Power meter ][ Home appliance devices ][ Set-top box ][ Thermostats ][ Sprinkler system displays ][ GPS ][ Satnav ][ Vending Machine Control Panels ][ Elevator Controls ] |
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
48 Pin VQFN;VQFN;VQFN-48 |
|
|
English Chinese Chinese and English Japanese |
|
|
2019-04-24 |
|
|
Version 1.3 |
|
|
BRT_000001 |
|
|
3.8 MB |
- +1 Like
- Add to Favorites
Recommend
- A ‘Touch’ of Versatility with Bridgetek EVE Custom Touch
- Elevate your Lift Controls with EVE in Graphical Touch Display Controls
- Bridge Monitoring Made Easy with IBridge Based on ElastiSense Two Sensors DS100
- What Is Industrial Router and Bridge？what Are the Differences Between Them？
- Bridge Monitoring in Greece Used Six Elastisense Sensor Technology DS Displacement Sensors
- The DS-Series Displacement sensors from ElastiSense are developed especially for bridge, adding safety and reducing costs
- ElastiSense‘s Partnership with Smart Sensor Systems from Norway Offering the State-of-the-art Data Logger, iBridge
- Measure the Quality of Rectifier Bridge Reactor with 8 Steps
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
