AC/DC Converter Non-Isolation Buck Converter PWM method 3 W 20V BM2P209TF Reference Board

2020-05-20
The BM2P209TF-EVK-001 evaluation board outputs 20 V voltage from the input of 90 Vac to 264 Vac. The output current supplies upto 0.15 A. BM2P209TF which is PWM method DC/DC converter IC built-in 650 V MOSFET is used.
The BM2P209TF contributes to low power consumption by built-in a 650 V starting circuit. Built-in current detection resistor realizes compact power supply design.
Current mode control imposes current limitation on every cycle, providing superior performance in bandwidth and transient response. The switching frequency is 100 kHz in fixed mode. At light load, frequency is reduced and high efficiency is realized. Built-in frequency hopping function contributes to low EMI. Low on-resistance 9.5 Ω 650 V MOSFET built-in contributes to low power consumption and easy design.
Electronics Characteristics:
Not guarantee the characteristics, is representative value.
Unless otherwise noted :VIN = 230 Vac, IOUT = 50 mA, Ta:25 ℃
Feature:
■PWM Frequency =100kHz
■PWM current mode method
■Frequency hopping function
■Burst operation at light load
■Built-in 650 start circuit
■Built-in 650V switching MOSFET
■VCC pin under voltage protection
■VCC pin over voltage protection
■Over current limiter function per cycle
■Soft start function

ROHM

BM2P209TF-EVK-001BM2P209TF860 021 374 008860 080 474 010TMK107B7105MA-TTMK107B7104MA-TB2P-VHRFN1LAN6SRRE02VSM6SD1UBA80-706239211000000744 747 147 1MCR10EZPJ103

More

Part#

Reference Boardevaluation board

More

LED lights ]air conditioners ]cleaners ]

More

User's Guide

More

More

Please see the document for details

More

More

SOP-J8

English Chinese Chinese and English Japanese

2018.3

Rev.003

60UG078E

871 KB

- The full preview is over. If you want to read the whole 19 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: