EFR32 Wireless Gecko EFR32MG13 Errata

2020-12-28

This document contains information on the EFR32MG13 errata. The latest available revision of this device is revision D.
Errata that have been resolved remain documented and can be referenced for previous revisions of this device.
The device data sheet explains how to identify the chip revision, either from package marking or electronically.
Current Errata Descriptions:
●ADC_E213 – ADC KEEPINSLOWACC Mode
●ADC_E228 – Limited ADC Sampling Frequency in EM2
●CSEN_E201 – CSEN_DATA in Debug Mode
●CSEN_E202 – CSEN Baseline DMA Transfers
●CUR_E203 – Occasional Extra EM0/1 Current
●DBG_E204 – Debug Recovery with JTAG Does Not Work
●EMU_E214 – Device Erase Cannot Occur if Voltage Scaling Level is Too Low
●EMU_E220 – DECBOD Reset During Voltage Scaling After EM2 Wakeup
●I2C_E202 – Race Condition Between Start Detection and Timeout
●I2C_E203 – I2C Received Data Can be Shifted
●I2C_E204 – I2C0 Does Not Meet Fast Mode Plus (Fm+) Timing at Voltage Scale Level 0
●I2C_E205 – Go Idle Bus Idle Timeout Does Not Bring Device to Idle State
●I2C_E206 – Slave Holds SCL Low After Losing Arbitration
●LES_E201 — LFPRESC Can Extend Channel Start-Up Delay
●RADIO_E210 – BLE Receiver False Detection Determination
●RMU_E202 – External Debug Access Not Available After Watchdog or Lockup Full Reset
●RTCC_E203 – Potential Stability Issue with RTCC Registers
●RTCC_E205 – Wrap Event Can Be Missed
●TIMER_E202 — Continuous Overflow and Underflow Interrupts in Quadrature Counting Mode
●USART_E204 — IrDA Modulation and Transmission of PRS Input Data
●USART_E205 — Possible Data Transmission on Wrong Edge in Synchronous Mode
●WTIMER_E201 — Continuous Overflow and Underflow Interrupts in Quadrature Counting Mode

Silicon Labs

EFR32EFR32MG13EFM32

More

Part#

More

More

Errata

More

More

Please see the document for details

More

More

English Chinese Chinese and English Japanese

April, 2020

Revision 1.0

757 KB

- The full preview is over. If you want to read the whole 21 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: