STM32WB55xx Multiprotocol wireless 32-bit MCU Arm®-based Cortex®-M4 with FPU, Bluetooth® 5 and 802.15.4 radio solution Datasheet

2022-07-15

●The STM32WB55xx multiprotocol wireless and ultra-low-power devices embed a powerful and ultra-low-power radio compliant with the Bluetooth® Low Energy SIG specification v5.0 and with IEEE 802.15.4-2011. They contain a dedicated Arm^® Cortex^® -M0+ for performing all the real-time low layer operation.
●The STM32WB55xx devices are designed to be extremely low-power and are based on the high-performance Arm® Cortex^®-M4 32-bit RISC core operating at a frequency of up to 64 MHz. The Cortex^®-M4 core features a Floating point unit (FPU) single precision that supports all Arm® single-precision data-processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU) that enhances application security.
●Enhanced inter-processor communication is provided by the IPCC with six bidirectional channels. The HSEM provides hardware semaphores used to share common resources between the two processors.
●The STM32WB55xx devices embed high-speed memories (Flash memory up to 1 Mbyte, up to 256 Kbyte of SRAM), a Quad-SPI Flash memory interface (available on all packages) and an extensive range of enhanced I/Os and peripherals.
●Direct data transfer between memory and peripherals and from memory to memory is supported by fourteen DMA channels with a full flexible channel mapping by the DMAMUX peripheral.
●The STM32WB55xx devices embed several mechanisms for embedded Flash memory and SRAM: readout protection, write protection and proprietary code readout protection. Portions of the memory can be secured for Cortex® -M0+ exclusive access. The two AES encryption engines, PKA and RNG enable lower layer MAC and upper layer cryptography. A customer key storage feature may be used to keep the keys hidden.
●The devices offer one fast 12-bit ADC and two ultra-low-power comparators associated with a high accuracy reference voltage generator.
●The STM32WB55xx devices embed a low-power RTC, one advanced 16-bit timer, one general-purpose 32-bit timer, two general-purpose 16-bit timers, and two 16-bit low-power timers.
●In addition, up to 18 capacitive sensing channels are available. The devices also embed an integrated LCD driver up to 8x40 or 4x44, with internal step-up converter.
●They also feature standard and advanced communication interfaces, namely one USART (ISO 7816, IrDA, Modbus and Smartcard mode), one Low Power UART (LPUART), two I2C (SMBus/PMBus), two SPI (up to 32 MHz), one serial audio interface (SAI) with two channels and three PDMs, one USB 2.0 FS device with embedded crystal-less oscillator, supporting BCD and LPM, and one Quad-SPI with execute-in-place (XIP) capability.
●The STM32WB55xx operate in the -40 to +105 °C (+125 °C junction) temperature range from a 1.71 to 3.6 V power supply. A comprehensive set of power-saving modes enables the design of low-power applications.
●The STM32WB55xx include independent power supplies for analog input for ADC.
●Features
■Includes ST state-of-the-art patented technology
■Radio
◆2.4 GHz
◆RF transceiver supporting Bluetooth® 5 specification, IEEE 802.15.4-2011 PHY and MAC, supporting Thread and ZigBee® 3.0
◆RX Sensitivity: -96 dBm (Bluetooth® Low Energy at 1 Mbps), -100 dBm (802.15.4)
◆Programmable output power up to +6 dBm with 1 dB steps
◆Integrated balun to reduce BOM
◆Support for 2 Mbps
◆Dedicated Arm® 32-bit Cortex® M0 + CPU for real-time Radio layer
◆Accurate RSSI to enable power control
◆Suitable for systems requiring compliance with radio frequency regulations ETSI EN 300 328, EN 300 440, FCC CFR47 Part 15 and ARIB STD-T66
◆Support for external PA
◆Available integrated passive device (IPD) companion chip for optimized matching solution MLPF-WB55-01E3
■Ultra-low-power platform
◆1.71 V to 3.6 V power supply
◆◆40 °C to 85 / 105 °C temperature ranges
◆13 nA shutdown mode
◆600 nA Standby mode + RTC + 32 KB RAM
◆2.1 µA Stop mode + RTC + 256 KB RAM
◆Active-mode MCU: < 53 µA / MHz when RF and SMPS On
◆Radio: Rx 4.5 mA / Tx at 0 dBm 5.2 mA
■Core: Arm® 32-bit Cortex®-M4 CPU with FPU, adaptive real-time accelerator (ART Accelerator™) allowing 0-wait-state execution from Flash memory, frequency up to 64 MHz, MPU, 80 DMIPS and DSP instructions
■Performance benchmark
◆1.25 DMIPS/MHz (Drystone 2.1)
◆219.48 Coremark® (3.43 Coremark/MHz @64 MHz)
■Energy benckmark
◆303 ULPMark™ CP score
■Supply and reset management
◆High efficiency embedded SMPSstep-down converter with intelligent bypass mode
◆Ultra-safe, low-power BOR (brownout reset) with five selectable thresholds
◆Ultra-low-power POR/PDR
◆Programmable voltage detector (PVD)
◆VBAT mode with RTC and backup registers
■Clock sources
◆32 MHz crystal oscillator with integrated trimming capacitors (Radio and CPU clock)
◆32 kHz crystal oscillator for RTC (LSE)
◆Internal low-power 32 kHz (±5%) RC (LSI1)
◆Internal low-power 32 kHz (stability
±500 ppm) RC (LSI2)
◆Internal multispeed 100 kHz to 48 MHz oscillator, auto-trimmed by LSE (better than ±0.25% accuracy)

ST

STM32WB55xxSTM32WB55CCSTM32WB55RCSTM32WB55VCSTM32WB55CESTM32WB55RESTM32WB55VESTM32WB55CGSTM32WB55RGSTM32WB55VGSTM32WB55CxSTM32WB55RxSTM32WB55VxSTM32WB55VGV6TR

More

Part#

Multiprotocol wireless 32-bit MCU Arm®microcontrollers

More

Architecture ]Arm® Cortex®-M4 core ]MemoriesRF subsystem ]

More

Datasheet

More

More

Please see the document for details

More

More

UFQFPN48;VFQFPN68;WLCSP100;BGA129

English Chinese Chinese and English Japanese

October 2019

Rev 5

DS11929

5.7 MB

- The full preview is over. If you want to read the whole 178 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: