STM32WB55xx Multiprotocol wireless 32-bit MCU Arm®-based Cortex®-M4 with FPU, Bluetooth® 5 and 802.15.4 radio solution Datasheet
●The STM32WB55xx multiprotocol wireless and ultra-low-power devices embed a powerful and ultra-low-power radio compliant with the Bluetooth® Low Energy SIG specification v5.0 and with IEEE 802.15.4-2011. They contain a dedicated Arm® Cortex® -M0+ for performing all the real-time low layer operation.
●The STM32WB55xx devices are designed to be extremely low-power and are based on the high-performance Arm® Cortex®-M4 32-bit RISC core operating at a frequency of up to 64 MHz. The Cortex®-M4 core features a Floating point unit (FPU) single precision that supports all Arm® single-precision data-processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU) that enhances application security.
●Enhanced inter-processor communication is provided by the IPCC with six bidirectional channels. The HSEM provides hardware semaphores used to share common resources between the two processors.
●The STM32WB55xx devices embed high-speed memories (up to 1 Mbyte of Flash memory, up to 256 Kbyte of SRAM), a Quad-SPI Flash memory interface (available on all packages) and an extensive range of enhanced I/Os and peripherals.
●Direct data transfer between memory and peripherals and from memory to memory is supported by fourteen DMA channels with a full flexible channel mapping by the DMAMUX peripheral.
●The STM32WB55xx devices embed several mechanisms for embedded Flash memory and SRAM: readout protection, write protection and proprietary code readout protection. Portions of the memory can be secured for Cortex® -M0+ exclusive access.
●The two AES encryption engines, PKA and RNG enable lower layer MAC and upper layer cryptography. A customer key storage feature may be used to keep the keys hidden.
●The devices offer a fast 12-bit ADC and two ultra-low-power comparators associated with a high accuracy reference voltage generator.
●These devices embed a low-power RTC, one advanced 16-bit timer, one general-purpose 32-bit timer, two general-purpose 16-bit timers, and two 16-bit low-power timers.
●In addition, up to 18 capacitive sensing channels are available. The devices also embed an integrated LCD driver up to 8x40 or 4x44, with internal step-up converter.
●The STM32WB55xx devices also feature standard and advanced communication interfaces, namely one USART (ISO 7816, IrDA, Modbus and Smartcard mode), one low- power UART (LPUART), two I2Cs (SMBus/PMBus), two SPIs (up to 32 MHz), one serial audio interface (SAI) with two channels and three PDMs, one USB 2.0 FS device with embedded crystal-less oscillator, supporting BCD and LPM and one Quad-SPI with execute-in-place (XIP) capability.
●The STM32WB55xx operate in the -40 to +105 °C (+125 °C junction) and -40 to +85 °C (+105 °C junction) temperature ranges from a 1.71 to 3.6 V power supply. A comprehensive set of power-saving modes enables the design of low-power applications.
●The STM32WB55xx include independent power supplies for analog input for ADC.
●Features
■Includes ST state-of-the-art patented technology
■Radio
◆2.4 GHz
◆RF transceiver supporting Bluetooth® 5specification, IEEE 802.15.4-2011 PHY and MAC, supporting Thread and ZigBee® 3.0
◆RX sensitivity: -96 dBm (Bluetooth® Low Energy at 1 Mbps), -100 dBm (802.15.4)
◆Programmable output power up to +6 dBm with 1 dB steps
◆Integrated balun to reduce BOM
◆Support for 2 Mbps
◆Dedicated Arm® 32-bit Cortex® M0 + CPU for real-time Radio layer
◆Accurate RSSI to enable power control
◆Suitable for systems requiring compliance with radio frequency regulations ETSI EN 300 328, EN 300 440, FCC CFR47 Part 15 and ARIB STD-T66
◆Support for external PA
◆Available integrated passive device (IPD) companion chip for optimized matching solution (MLPF-WB55-01E3 orMLPF-WB55-02E3)
■Ultra-low-power platform
◆1.71 to 3.6 V power supply
◆◆40 °C to 85 / 105 °C temperature ranges
◆13 nA shutdown mode
◆600 nA Standby mode + RTC + 32 KB RAM
◆2.1 µA Stop mode + RTC + 256 KB RAM
◆Active-mode MCU: < 53 µA / MHz when RF and SMPS on
◆Radio: Rx 4.5 mA / Tx at 0 dBm 5.2 mA
■Core: Arm® 32-bit Cortex®-M4 CPU with FPU, adaptive real-time accelerator (ART Accelerator) allowing 0-wait-state execution from Flash memory, frequency up to 64 MHz, MPU, 80 DMIPS and DSP instructions
■Performance benchmark
◆1.25 DMIPS/MHz (Drystone 2.1)
◆219.48 CoreMark® (3.43 CoreMark/MHz at 64 MHz)
■Energy benckmark
◆303 ULPMark™ CP score
■Supply and reset management
◆High efficiency embedded SMPSstep-down converter with intelligent bypass mode
◆Ultra-safe, low-power BOR (brownout reset) with five selectable thresholds
◆Ultra-low-power POR/PDR
◆Programmable voltage detector (PVD)
◆VBAT mode with RTC and backup registers
STM32WB55xx 、 STM32WB55CC 、 STM32WB55RC 、 STM32WB55VC 、 STM32WB55CE 、 STM32WB55RE 、 STM32WB55VE 、 STM32WB55CG 、 STM32WB55RG 、 STM32WB55VG 、 STM32WB55Cx 、 STM32WB55Rx 、 STM32WB55Vx |
|
Multiprotocol wireless 32-bit MCU Arm®-based Cortex®-M4 、 microcontrollers |
|
|
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
UFQFPN48;VFQFPN68;WLCSP100;UFBGA129 |
|
English Chinese Chinese and English Japanese |
|
19 February 2020 |
|
Rev 6 |
|
DS11929 |
|
5.6 MB |
- +1 Like
- Add to Favorites
Recommend
- Rosenberger and STMicroelectronics Cooperate to Develop a Unique High-Speed Contactless Connector Based on 60GHz Wireless Technology
- G-NiceRF’s New LoRa Spread Spectrum Modulation SOC Wireless Module LoRa-STM32WLE5 with Built-in ARM and Industrial Grade Crystal Oscillator
- STMicroelectronics and Sierra Wireless Collaborate to Simplify and Accelerate Connected IoT Solutions Deployment
- MTA Announces Partnership with STMicroelectronics for Smart Tractor
- Eclipse Global Connectivity, Smiths Interconnect and ST Engineering IDirect Collaborate to Deliver a New Airborne ISR SATCOM Capability
- ROHM Group Company SiCrystal and STMicroelectronics Expand Silicon Carbide Wafer Supply Agreement
- China Requires Automobile Manufacturers to Increase the Proportion of Domestic Chip Procurement
- Rosenberger‘s Innovative Contactless Connector RoProxCon can Bridge Construction-related Air Gaps and Has A High Interference Immunity
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.