ACS71240 Automotive-Grade, Galvanically Isolated Current Sensor IC with Common-Mode Field Rejection and Overcurrent Detection in Small Footprint Low-Profile Packages Data Sheet
●The Allegro™ ACS71240 current sensor IC is an economical and precise solution for AC or DC current sensing in industrial, automotive, commercial, and communications applications.
●The device consists of a precise, low-offset linear Hall sensor circuit with a copper conduction path located near the surface of the die. Applied current flowing through this copper path generates a magnetic field which is sensed by the integrated Hall IC and converted into a proportional voltage. The resistance of the integrated conductor is far less than typical sense resistors, which reduces power loss and improves efficiency.
●Rejection of external common-mode magnetic fields is achieved through differential sensing, enabling high accuracy in magnetically noisy environments. A precise voltage proportional to the measured current is generated by the low-offset, chopper-stabilized Hall front end.Zero ampere output voltage and device sensitivity are programmed at the Allegro factory to provide a high accuracy solution across the full automotive temperature range. The ACS71240 includes an integrated fault comparator for simplified overcurrent detection. The ultrafast response time provides the system with ample time to detect and protect against short-circuit events.
●The ACS71240 is provided in small, low-profile surface-mount package options: QFN-12 with wettable flank and SOIC-8. The leadframe is plated with 100% matte tin, which is compatible with standard lead (Pb) free printed circuit board assembly processes. Internally, the device is Pb-free, except for flip-chip high-temperature Pb-based solder balls, currently exempt from RoHS. The device is fully calibrated prior to shipment from the factory.
●FEATURES AND BENEFITS:
■AEC-Q100 automotive qualified
■Differential Hall sensing rejects common-mode fields
■Integrated shield virtually eliminates capacitive coupling from current conductor to die, greatly suppressing output noise due to high dv/dt transients
■Industry-leading noise performance with greatly improved bandwidth through proprietary amplifier and filter design techniques
■High bandwidth 120 kHz analog output for faster response times in control applications
■Patented integrated digital temperature compensation circuitry allows for near closed-loop accuracy over temperature in an open loop sensor
■Single supply operation with nonratiometric output at 3.3 and 5 V options
■Overcurrent FAULT available between 50% and 200% IPwith 1.5μs (typ) response time
■Non-ratiometric output provides immunity to noisy supplies
■Small footprint QFN-12 with wettable flank and SOIC-8 suitable for space-constrained automotive applications
■0.6 mΩ (QFN-12) or 1.2 mΩ (SOIC-8) primary conductor resistance for low power loss and high inrush current withstand capability
■UL certified package (SOIC-8 only) for voltage isolation
|
ACS71240 、 ACS71240KEXBLT-010B3 、 ACS71240KEXBLT-030B3 、 ACS71240KEXBLT-050U5 、 ACS71240KEXBLT-010B3-115 、 ACS71240LLCBTR-010B3 、 ACS71240LLCBTR-030B3 、 ACS71240LLCBTR-045B5 、 ACS71240LLCBTR-050U5 、 ACS71240KEXBTR-010B3-115 |
|
|
|
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
QFN;SOIC |
|
|
English Chinese Chinese and English Japanese |
|
|
May 31, 2019 |
|
|
Rev.1 |
|
|
ACS71240-DS;MCO-0000621 |
|
|
1.7 MB |
- +1 Like
- Add to Favorites
Recommend
- Crocus Technology Acquired by Allegro MicroSystems to Accelerate Innovation in TMR Sensing Technology
- Melexis Unveils Automotive 200-2000A Current Sensors with Integrated Overcurrent Detection
- Crocus Current Sensors Offers Solar Inverters High Accuracy, High Bandwidth and Low Noise
- Melexis Launches the MLX91230 Current Sensors Which Brings 0.5% Accuracy in a Compact Design
- Melexis Introduces Next Generation of Isolated Integrated Current Sensors for Automotive Applications
- In 2022, Melexis’ Outperforming Product Lines Were Current Sensors, Embedded Drivers, Magnetic Position Sensors, and Temperature Sensors
- ZETTLER Magnetics ACST Current Sensors Used in Charging of Electric Vehicles
- Melexis Reveals High-accuracy Current Sensors Optimized for Affordable E-mobility
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
