UG396: xGM210Lx22 Wireless Gecko Module Radio Board User's Guide
A Wireless Starter Kit with the BRD4309B Radio Board is an ex-cellent starting point to get familiar with the xGM210Lx22 Wireless Gecko Module. It also provides the necessary tools for developing a Silicon Labs wireless application. BRD4309B contains the xGM210Lx22 Module, and it is a plug-in board for the Wireless Starter Kit Mainboard. The Wireless Starter Kit Mainboard contains an on-board J-Link debugger with a Packet Trace Interface and a virtual COM port, enabling application development and debugging the attached radio board as well as external hardware. The mainboard also contains sensors and peripherals for easy demonstration of some of the xGM210L's many capa-bilities. This document describes how to use the BRD4309B Radio Board together with a Wire-less Starter Kit Mainboard.
BRD4309B RADIO BOARD FEATURES:
• xGM210L Wireless Gecko Module with 1024 kB Flash, 96 kB RAM, integrated chip antenna and connector for external antenna, RF matching networks, crystals,and supply decoupling (part no. MGM210L022JIF2).
WIRELESS STK MAINBOARD FEATURES:
• Advanced Energy Monitor
• Packet Trace Interface
• Virtual COM port
• SEGGER J-Link on-board debugger
• External device debugging
• Ethernet and USB connectivity
• Silicon Labs Si7021 relative humidity and temperature sensor
• Low Power 128x128 pixel Memory LCD
• User LEDs / push buttons
• 20-pin 2.54 mm EXP header
• Breakout pads for Module I/O
• CR2032 coin cell battery support
The xGM210Lx22 Wireless Gecko Module is featured on a radio board that plugs directly into a Wireless Starter Kit (WSTK) Mainboard. The mainboard features several tools for easy evaluation and development of wireless applications. An on-board J-Link debugger enables programming and debugging on the target device over USB or Ethernet. The Advanced Energy Monitor (AEM) offers realtime current and voltage monitoring. A virtual COM port interface (VCOM) provides an easy-to-use serial port connection over USB orEthernet. The Packet Trace Interface (PTI) offers invaluable debug information about transmitted and received packets in wireless links.All debug functionality, including AEM, VCOM, and PTI, can also be used towards external target hardware instead of the attached radio board.To further enhance its usability, the mainboard contains sensors and peripherals that demonstrate some of the many capabilities of thexGM210Lx22. A 20-pin expansion header (EXP header) is also provided that allows connection of expansion boards (EXP boards) tothe kit.
|
xGM210Lx22 、 xGM210L 、 MGM210L022JIF2 、 SLWRB4309B 、 BRD4309B 、 EFM32 、 EFM8 、 EZR32 、 EFR32 、 BRD8010A |
|
|
|
|
|
User's Guide |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
September 2019 |
|
|
Rev. 1.0 |
|
|
UG396 |
|
|
1.8 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
