Stacking Height Guide for Parallel Board-to-Board Applications Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board)
The MICTOR connector family is based on the microstrip concept of two rows of signal contacts divided by a center power ground plane. MICTOR connectors are motherboard and daughtercard compatible and include designs for cable-to-board applications.
Various mated heights are available for parallel boardto-board systems. Custom stacking heights can be provided. The MICTOR connector family is available in 0.64 [.025] centerlines and in sizes ranging from 38 signal positions to 266 positions (in increments of 38 positions). There is a discrete ground bus every 12.7 [.50] of the connector length, which can be assigned to either power or ground in any combination.
Redundant interfaces on every signal line provide added reliability. Two plating options are available to meet the needs of various applications.
The housing material is a liquid crystal polymer, compatible with infrared and forced air convection operations.
The connector system uses the solid ground bus between the rows of signals to provide low crosstalk and excellent high-speed signal characteristics.
Product Facts:
■ 76 dedicated signal lines per linear inch
■ Surface mount family designed for parallel and right angle board-to-board, flex-to-board and cable-toboard configurations
■ 0.64 [.025] centerline contact spacing
■ Redundant interfaces on mated contacts
■ Fifteen mated stack heights available ranging from 6.60 [.260] to 31.90 [1.256]
■ Infrared and forced air convection compatible housing materials
■ Designed for 50-ohm systems
■ Connector housings polarized for correct mating
■ Built-in connector-to-board retention feature
■ Connector can be separated by peeling from one end to the other
■ Various packaging styles can be made available for automated assembly (tape and reel, tubes)
■ Recognized under the Component Program of Underwriter Laboratories Inc. File No. E28476
- +1 Like
- Add to Favorites
Recommend
- ROHM Introduces New BD77502FVM 2-Channel High-Speed Ground Sense CMOS Op Amp
- Automotive Molded SMD Power Inductor—AMP Series with High Current Features, Low DC Resistance, and Better DC Bias
- ROHM‘s New Zero-Drift Op Amp with High Accuracy Regardless of Temperature Changes, Offering 9µV Input Offset Voltage
- Dual Op AMP and Voltage Reference HM4310, Designed to Regulate the Output Current and Voltage Levels of Switching Battery Chargers and Power Supplies
- AC to DC Converter 12V 15 Amp: Efficient Power Supply Solution with High Current Rating, Compact Design, Energy Efficiency, and Safety Features
- Runic‘s OP Amp RS622,Analog Switch RS2105 and Low-Consumption LDO RS3236 Apply in Finger Clip Oximeter
- ROHM Develops a New Op Amp that Minimizes Current Consumption, Improving Power Savings in Consumer and Industrial Equipment
- Runic‘s OP Amp RS8538and RS622, Low-Consumption LDO RS3236 Apply in Electronic Blood-Pressure Meter
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.