MIC5011 Minimum Parts High- or Low-Side MOSFET Driver

2022-09-07

●The MIC5011 is the “minimum parts count” member of the Micrel MIC501X driver family. These ICs are designed to drive the gate of an N-channel power MOSFET above the supply rail in high-side power switch applications. The 8-pin MIC5011 is extremely easy to use, requiring only a power FET and nominal supply decoupling to implement either a high- or low-side switch.
The MIC5011 charges a 1nF load in 60µs typical with no external components. Faster switching is achieved by adding two 1nF charge pump capacitors. Operation down to 4.75V allows the MIC5011 to drive standard MOSFETs in 5V low-side applications by boosting the gate voltage above the logic supply. In addition, multiple paralleled MOSFETs can be driven by a single MIC5011 for ultra-high current applications.
Other members of the Micrel driver family include the MIC5013 protected 8-pin driver.
For new designs, Micrel recommends the pin-compatible MIC5014 MOSFET driver.
●Features
■4.75V to 32V operation
■Less than 1µA standby current in the “off” state
■Internal charge pump to drive the gate of an N-channel power FET above supply
■Available in small outline SOIC packages
■Internal zener clamp for gate protection
■Minimum external parts count
■Can be used to boost drive to low-side power FETs operating on logic supplies
■25µs typical turn-on time with optional external capacitors
■Implements high- or low-side drivers

Microchip

MIC5011MIC5013MIC5014MIC501XMIC5011BNMIC5011YNMIC5011BMMIC5011YM

More

Part#

Minimum Parts High- or Low-Side MOSFET Driver

More

Lamp drivers ]Relay drivers ]solenoid drivers ]Heater switching ]Power bus switching ]

More

Datasheet

More

More

Please see the document for details

More

More

SOIC;DIP

English Chinese Chinese and English Japanese

July 2005

496 KB

- The full preview is over. If you want to read the whole 12 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: