“Stand Alone” RF Power Capabilities Of The DEIC420 MOSFET Driver IC at 3.6, 7, 10, and 14 MHZ. TECHNICAL NOTE
■Abstract:
●The DEIC420 MOSFET driver IC is evaluated as a “stand alone” RF source at 3.6, 7, 10, and 14 MHZ. To create up to 47W of CW RF all that is required is a clock oscillator, RF resonant tank, and associated output matching circuitry. This module can be used as a medium power RF source for amateur radio use, a laboratory RF source, a source of sine wave gate drive, and many other applications where a compact RF source is required.
■Introduction:
●The DEIC420 is a 20A_pk high-speed MOSFET gate drive IC available from DEI/IXYS. It is compact and self-contained requiring only VCC, a 5V TTL clock signal, and appropriate heat sinking to produce a pulsed RF output signal. The addition of a simple L/C resonant tank and an impedance matching network produces a sine wave output to a standard 50Ω load. With the addition of a keying circuit and additional harmonic filtering the IC can be utilized as an Amateur Radio CW source for operation through at least 20 Meters (14MHZ).
|
|
Application note & Design Guide |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
2019/03/04 |
|
Rev 1 |
|
9300-0007 |
|
600 KB |
- +1 Like
- Add to Favorites
Recommend
- 1A Fault Protected Solid State Relay with Integrated Current Limiting and Thermal Shutdown | Littelfuse
- Littelfuse Completes Acquisition of C&K Switches
- Littelfuse Named One of America’s Best Mid-sized Companies by Forbes
- Littelfuse IX4351NE SiC MOSFET & IGBT Driver Wins Annual Power Product Award
- Littelfuse Launches 1500 Volt Solar String Fuse and Holder Rated 35 to 60 Amperage
- Littelfuse Acquires Embed,Embedded software and firmware expands technical capabilities
- Littelfuse to Acquire Carling Technologies, Accelerates growth in commercial vehicles and communications infrastructure
- Littelfuse Completes Acquisition of Carling Technologies
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.