HTU21D(F) RH/T SENSOR Digital Relative Humidity sensor with Temperature output
by MEAS. Setting new standards in terms of size and intelligence, it is embedded in a reflow solderable Dual Flat No leads (DFN) package with a small 3 x 3 x 0.9 mm footprint. This sensor provides calibrated, linearized signals in digital, I²C format.
HTU21D(F) digital humidity sensors are dedicated humidity and
temperature plug and play transducers for OEM applications where
reliable and accurate measurements are needed. Direct interface with a micro-controller is made possible with the module for humidity and temperature digital outputs. These low power sensors are designed for high volume and cost sensitive applications with tight space constraints.
Every sensor is individually calibrated and tested. Lot identification is
printed on the sensor and an electronic identification code is stored on the chip – which can be read out by command. Low battery can be detected and a checksum improves communication reliability. The resolution of these digital humidity sensors can be changed by command (8/12bit up to 12/14bit for RH/T).
With MEAS’ improvements and miniaturization of this sensor, the
performance-to-price ratio has been improved – and eventually, any device should benefit from its cutting-edge energy saving operation mode.
Optional PTFE filter/membrane (F) protects HTU21D digital humidity
sensors against dust and water immersion, as well as against contamination by particles. PTFE filter/membranes preserve a high response time. The white PTFE filter/membrane is directly stuck on the sensor housing. This membrane is allowing an IP67 compliant protection.
HTU21D 、 HTU21DF 、 HTU2XY 、 HTU2XYF 、 WPP100B001 、 WPP109B001 、 HPP845E031R4 、 HPP845E031R1 、 HPP845E031R5 、 HPP845E131R4 、 HPP845E131R1 、 HPP845E131R5 |
|
BLE Sensor Tag Demo 、 RH/T SENSOR IC 、 Digital Relative Humidity sensor with Temperature output |
|
[ Home Appliance ][ Medical ][ Printers ][ Humidifier ] |
|
Datasheet |
|
ESD(CDM,750V corner pins, 500V other pins) 、 ESD(HBM, ±4kV) 、 ESD(MM,±200V) 、 IP67 、 Lead free 、 Pb free 、 RoHS |
|
Please see the document for details |
|
|
|
|
|
DFN |
|
English Chinese Chinese and English Japanese |
|
05/2017 |
|
|
|
|
|
2.3 MB |
- +1 Like
- Add to Favorites
Recommend
- TE Connectivity to acquire antennas business from Laird Connectivity
- Wind Farms On-and Off-shore Reduces Installation Time with TE Connectivity’s New Easy-to-use High Voltage Joints (PHVJ)
- TE Connectivity Acquires Smart Grid Company Kries, Expanding TE’s Smart Grid Monitoring, Protection, Automation Capabilities
- TE Connectivity and Sekorm Reached A Strategic Cooperation on the Connector Business
- TE Connectivity‘s Raychem USB 3.1 cable provides up to 10 Gb/s data rates and Jacket elongation of 200% minimum
- TE Connectivity Acquires ERNI Group AG
- TE Connectivity Launches First-to-market SolderSleeve Device for Space
- TE Connectivity begins expansion of ERNI facility in Germany
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.