ACTP250J1BJ AC Transient Protector
●The Bourns® Model ACTP250J1BJ is a bidirectional thyristor designed to be used in series with an overvoltage clamp device, such as an MOV,to protect a power supply from damage due to an overvoltage condition on its ac input lines. This device raises the turn-on voltage threshold of the series combination against low frequency overvoltage conditions while having minimal impact on the voltage clamp level when subjected to a lightning surge. Using this series combination will prevent the MOV from conducting when line frequency voltage swells (up to the sum of the breakdown voltages of the two components) occur on the ac input lines of the power supply. This allows a design to avoid the use of a higher voltage MOV, which, if used, would signifi cantly reduce the level of lightning protection. See the Application section for additional information.
ACTP250J1BJ 、 MD4JAA 、 SD4JAA 、 ACTP250J1BJR-S 、 PM4XAF 、 TC4JAG 、 TC4JAF 、 TI4JADC 、 TI4JAA 、 ACTP250J1B1 、 MDXXBID |
|
|
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
DO-214AA |
|
English Chinese Chinese and English Japanese |
|
07/15 |
|
|
|
|
|
558 KB |
- +1 Like
- Add to Favorites
Recommend
- [产品]日清纺300mA的稳压器R1526,输出电压范围为1.8~9.0V,具有过电流保护
- ept One27® SMT PCB Connectors with a Pitch of 1.27mm is Suitable for Board-to-board Applications ∣ video
- The Installation Advantages, Structural Features and Product Applications of WAGO‘s 2273 Series Compact Wire Connectors ∣ Video
- 蓝牙SOC芯片是无线通信技术的核心力量
- Greenconn荣获邓白氏企业认证,实力彰显行业领先水平
- [经验]瑞萨32位MCU RA2E1如何利用FSP工具生成sci_uart的配置代码
- [应用]25A/40V德欧泰克SBX2540-3G太阳能旁路二极管用于光伏电池板,泄漏电流低仅200μA
- RARA Would Like to Give Customers a “One-stop Solution” with All Kinds of Resistive Products
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.