A7801 DC-DC CONVERTER LOW NOISE, REGULATED CHARGE PUMP
(400kHz) switched capacitor voltage doubler. It
produce a regulated output voltage from a 2.5V to 5.5V input with up to 250mA of output current. Low external parts count (one flying capacitor and two small bypass capacitors at VIN and VOUT) make the
A7801 ideally suited for small, battery-powered
applications.
A new charge-pump architecture maintains
constant switching frequency to zero load and
reduces both output and input ripple. The A7801 have thermal shutdown capability and can survive a continuous short circuit from VOUT to GND. Built-in soft-start circuitry prevents excessive inrush current
during start-up.
High switching frequency enables the use of small
ceramic capacitors. A low current shutdown feature disconnects the load from VIN and reduces quiescent current to <1uA.
The A7801 is available in SOT-26 package.
[ White LED Backlighting ][ Li-Ion Battery Backup Supplies ][ Local 3V to 5V Conversion ][ Smart Card Readers ][ PCMCIA Local 5V Supplies ] |
|
Datasheet |
|
Halogen free 、 RoHS |
|
Please see the document for details |
|
|
|
|
|
SOT-26 |
|
English Chinese Chinese and English Japanese |
|
JAN 2015 |
|
REV1.0 |
|
|
|
630 KB |
- +1 Like
- Add to Favorites
Recommend
- AiT A6303 Series——300mA, Positive Voltage Output CMOS LDO Regulators
- 512Kbit I²C Compatible Serial EEPROM AiT A24C512 Requires a Single Power Supply in the Range of 1.7V to 5.5V
- AiT A7545 current mode boost DC-DC converter with Adjustable Output up to 9V and Internal Fixed PWM frequency of 1MHz
- AiT A713 DC-to-DC Step-down Switching Regulator with High Efficiency of up to 95%, ideal for Low-voltage Power Conversions
- AiT Offers Wide Range of Highly Precise SMD/TH Crystal Components in Half Size, Full Size, Cylindrical and Tuning Fork Packages
- AiT Offers Compact SMD Power Inductors Available in SMD Size Range from 0602 to 1812
- AiT offers 1A Linear Li-ion Batteries Charger IC A4051 for Single-cell Lithium-ion Batteries
- AiT‘s A7115B: a 1.5A, 2MHz High Efficiency Buck DC-DC Converter for Powering Portable Equipment
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.