PRF-1150 1KW 13.56 MHz CLASS E RF GENERATOR EVALUATION MODULE

2022-05-07

●Abstract: The PRF-1150 module is a self-contained 1KW 13.56MHz RF source. The module facilitates operation and evaluation of the DEIC420 RF MOSFET gate driver IC and DE275X2-102N06A RF MOSFET in a practical 13.56 MHz RF generator application. It is all-inclusive, pre-tested, and ready to operate.
●INTRODUCTION: DEI has developed an RF module to demonstrate the capabilities of our DEIC420 RF MOSFET gate driver IC and DE275-102N06X2A 1000V 6A RF MOSFET at ISM frequencies. The PRF-1150 module produces 1000W CW of RF output at 13.56MHz. with 85% DC to RF conversion efficiency. The module is a self-contained RF generator. To produce 1kW of RF output, only external DC power need be applied. The module dimensions as shown in Figure 1 are 6.75" x 3.1" x 2.7" including an air-cooled heatsink and copper heat-spreader. Impingement flow from a standard 4.5" bench fan provides adequate cooling for the 1kW output level. Standard 0.1" dual and single row headers are used for DC input to the module and a single right-angle BNC connector is used for RF output to a 1kW 50Ω RF load or attenuator.

IXYS

PRF-1150DE275X2-102N06ADEIC420

More

Part#

CLASS E RF GENERATOR EVALUATION MODULEmoduleRF MOSFET gate driver ICRF MOSFETRF module

More

More

Application note & Design Guide

More

More

Please see the document for details

More

More

English Chinese Chinese and English Japanese

2002

Rev 1

Doc#9200-0255

739 KB

- The full preview is over. If you want to read the whole 20 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: