74ALVC16836A 20-bit registered driver with inverted register enable; 3-state Product data sheet

2022-06-21

●The 74ALVC16836A is a 20-bit universal bus driver. Data flow is controlled by active low output enable (OE), active low latch enable (LE) and clock inputs (CP).
●When LE is LOW, the A to Y data flow is transparent. When LE is HIGH and CP is held at LOW or HIGH, the data is latched; on the LOW to HIGH transient of CP the A-data is stored in the latch/flip-flop.
●When OE is LOW the outputs are active. When OE is HIGH, the outputs go to the high impedance OFF-state. Operation of the OE input does not affect the state of the latch/flip-flop.
●To ensure the high-impedance state during power up or power down, OE should be tied to V-CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
●Features and benefits:
■ Wide supply voltage range from 1.2 V to 3.6 V
■CMOS low-power consumption
■Direct interface with TTL levels
■Current drive ± 24 mA at 3.0 V
■MULTIBYTE flow-through standard pin-out architecture
■Low inductance multiple V-CC and GND pins for minimum noise and ground bounce
■Output drive capability 50 Ω transmission lines at 85°C
■Input diodes to accommodate strong drivers
■Complies with JEDEC standard no. 8-1A• Complies with JEDEC standa:
▲JESD8-5 (2.3 V to 2.7 V)
▲JESD8B/JESD36 (2.7 V to 3.6 V)
■ESD protection:
▲HBM ANSI/ESDA/JEDEC JS-001 exceeds 2000 V
▲CDM JESD22-C101E exceeds 1000 V

Nexperia

74ALVC16836A74ALVC16836ADGG

More

Part#

20-bit registered driver

More

More

Datasheet

More

More

Please see the document for details

More

More

TSSOP56

English Chinese Chinese and English Japanese

12 September 2018

Rev. 2

467 KB

- The full preview is over. If you want to read the whole 14 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: