R&S®SMATE-K63/ R&S®SMU-K63 User-Defined I/Q Frequency Response Compensation Specifications Data Sheet
●This option enables the user to define RF frequency response and image compensation for the internal baseband sources of the R&S® SMU200A and R&S® SMATE200A.It considerably enhances signal quality as regards frequency response and image rejection of wideband signals.External components that follow such as amplifiers,mixers or filters can also be compensated.Compensation is performed by hardware correction filters and is,therefore,independent of the baseband signal applied.
●Specifications apply under the following conditions:30 minutes warm-up time at ambient temperature,specified environmental conditions met,calibration cycle adhered to,and all internal automatic adjustments performed."Typical values"are designated with the abbreviation "typ."These values are verified during the final test but are not assured by Rohde & Schwarz."Nominal values"are design parameters that are not assured by Rohde Schwarz.These values are verified during product development but are not specifically tested during production.
|
R&S®SMATE-K63 、 R&S®SMU-K63 、 1161.0866.02 、 1404.7400.02 、 R&S®SMU200A 、 R&S®SMATE200A 、 R&S®SMU-K62 、 R&S®SMU-B9 、 R&S®SMU-B10 、 R&S®SMU-B11 、 R&S®SMATE-B13 、 R&S®SMU-B17 、 R&S®SMU-B13 、 R&S®SMATE-K62 、 R&S®FSQ8 、 R&S®FSQ26 、 R&S®FSQ40 、 R&S®FSQ-B72 、 R&S®FSU8 、 R&S®FSU26 、 R&S®FSU43 、 R&S®FSP7 、 R&S®FSP13 、 R&S®FSP30 、 R&S®FSL6 、 R&S®FSL18 、 R&S®NRP 、 R&S®NRP-Z11 、 R&S®NRP-Z21 、 R&S®NRP-Z22 、 R&S®NRP-Z23 、 R&S®NRP-Z24 、 R&S®NRP-Z91 |
|
|
amplifiers 、 mixers 、 filters |
|
|
|
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
May 2008 |
|
|
Version 01.00 |
|
|
PD 5214.0830.22 |
|
|
423 KB |
- +1 Like
- Add to Favorites
Recommend
- ROHM Introduces New BD77502FVM 2-Channel High-Speed Ground Sense CMOS Op Amp
- ROHM‘s New Zero-Drift Op Amp with High Accuracy Regardless of Temperature Changes, Offering 9µV Input Offset Voltage
- Dual Op AMP and Voltage Reference HM4310, Designed to Regulate the Output Current and Voltage Levels of Switching Battery Chargers and Power Supplies
- AC to DC Converter 12V 15 Amp: Efficient Power Supply Solution with High Current Rating, Compact Design, Energy Efficiency, and Safety Features
- Automotive Molded SMD Power Inductor—AMP Series with High Current Features, Low DC Resistance, and Better DC Bias
- Runic‘s OP Amp RS622，Analog Switch RS2105 and Low-Consumption LDO RS3236 Apply in Finger Clip Oximeter
- ROHM Develops a New Op Amp that Minimizes Current Consumption, Improving Power Savings in Consumer and Industrial Equipment
- Runic‘s OP Amp RS8538and RS622, Low-Consumption LDO RS3236 Apply in Electronic Blood-Pressure Meter
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
